The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

Info below not updated anymore, see redmine roadmap for latest data

Warning: Last update below was for 2.0.156 (03.04.2020)

TELEM-AGC, TELEM-GW6e, TELEM-GWM53 and TELEM-GWM25

Recommended software

Warning! GWS >= 2142 must be used

kernel4:

2.0.156-3e1f29e-k4 - GW6e VMX53/6DL, AGC 6DL/6UL

2.0.156-3e1f29e-k4-03 - GWM VMX25/VMX53/6DL/6UL

kernel2(pre 2014 devices):

2020.04.01-next-02-c8fd29a - GW6e (No IEC61850 Client)

Firmware downgrade

Warning:

Downgrading firmware has never been supported.
It is possible to downgrade, but there are no guarantees.

telem-app Changelog for kernel 4

2.0.156-3e1f29e-k4/2.0.156-3e1f29e-k4-03 (GWS 2142)

IEC61850 | IEC 61850 Client KEMA certified

IEC60870 | 104 Server KEMA certified

IEC60870 | 101UB Server fix AI event sent as normalized when implied float

IEC60870 | FIX AO subtype determination

IEC60870 | Fix DO/AO unknown COT

IEC60870 | 101B Server fix floating point subtype up

IEC60870 | Fix deact in client

IEC60870 | Fix multiple lower level addresses per device (fix #3450)

IEC60870 | DO/AO fixes

OPC UA | OPC UA Server implementation

Api | Add cls.json to webserver (fix #3522)

Db | Fix backup import

Core | Boost 1.71

Core | Sensor code safer

Core | Sensor objects have flags

Core | AGC SCL IO

ModBus | Mitigate offset in value<->data (fix #3462)

ModBus | Initial impl of 64 bit ai type (fix #3402)

2.0.141-3b46188-k4-02 Telem-GWM (GWS 2133)

Core | Fixed Control issues

Logging | PCAP feature

2.0.141-3b46188-k4 Telem-AGC, Telem-GW6e (GWS 2133)

Core | Fixed Control issues

Logging | PCAP feature

2.0.132-ddea1dd-k4-02 Telem-AGC, Telem-GW6e (GWS 2131)

Core | Fixed Select event loss issue

Logging | Improved logging

2.0.132-ddea1dd-k4-03 Telem-GWM (GWS 2131)

Core | Fixed Select event loss issue

Logging | Improved logging

2.0.82-288715d-k4 Telem-GW6e, Telem-GWM (GWS 2104)

Updates | Minor bug fixes

2018.02.08-linux_4-04-b7d1941 / 2018.02.08-next-02-1a34917 (GWS 2086)

Formula | Fix complex formulas not recalculating after after init

2018.01.12-linux_4-01-8b72574 / 2018.01.12-next-02-abe5e00 (GWS 2083)

Formula | DB accessor thread optimisations

Change Filter | Discard NaN values. Pass event with previous value and OVF bit

IEC60870 | Event priority rework

Core | Periodical GI improvements

IEC61850 | Alstom P14 DI bug workaround #2916

IEC61850 | Improve cmds #2925

IEC101UB Slave | Improve varLenMsg parsing #2933

IEC101/104 | Add debug messages to AO cmd

Scale Filter | Fix AI scaling twice on lower device timeout #2930

2017.11.18-linux_4-01-87d4416 / 2017.11.18-next-01-9c9c97b (GWS 2081b)

Build for all devices and kernels

2017.11.10-linux_4-01-8595646 / N/A k2 (GWS 2081b)

Formula | Integral expression minor timing fix #2848

IEC60870 | Fix device objects not sent with GI on 101-104 translation, only lower device objects #2908

2017.10.31-linux_4-03-e9d281f / N/A k2 (GWS 2081b)

Formula | Integral expression rewrite to integral(@ai, @di) #2848

Filter | Optimize lock usage between LatestValues and UpdateLatest

telem-app Changelog for kernel 2

2018.02.08-next-02-1a34917

Formula | Fix complex formulas not recalculating after after init

Other fixes

2017.09.26-next-03-c81082e / 2017.09.26-linux_4-05-50ff00d (GWS 2079)

HOTFIX IEC101/104 DO_FN | Fix: SCADA did not receive command status responses if DO_FN object configured for IED #2871

2017.09.20-next-01-b162ac5 / 2017.09.20-linux_4-02-2436894 (GWS 2079)

Modbus | Polling sequence fix (AI was polled less) #2871

Modbus | Communication on port stalls if any device has no valid objects #2873

2017.09.13-next-01-800b844 / 2017.09.13-linux_4-feature-integral-expression-01-930dddd (GWS 2079)

Modbus | fix AO scaling #2807

2017.09.11-linux_4-01-7ee57df (GWS 2079)

Telem Master | support 18 (was 17) CMD address

Formula | AI Formula -> AO CMD fix

2017.08.08 (GWS 2079)

WebServer | Correctly set persistant pages

WebServer | Fix user credentials

GWM IO-Board IFR feature #2841

Modbus | Fix polling delay #2839

WebServer | fix sprintf buffer size

Channel | Channel optimisations

Core | Fix thread pool manager (TaskIoBase)

WebServer | replace deprecated functions

IEC101/104 | add DST bit functionality #2833

2017.06.09-next-01-353984f (GWS 2079)

Reset 2 Clear Buffers fix #2814

2017.04.17-next-08-af772c0

Logging | Buffered logging

2017.04.05-next-07-65a2e5a

SPA-Bus | Timesync: send 3x short ts and 3x long ts

2017.04.03-next-01-557bc40

Core | Fix spontaneous events after GI on initial successful lower lever device initialisation (#2793)

Core | Refix sending reset cmds from TDC

2017.03.21-next-03-b5cc1d0

Optimisation (Webserver) | Avoid websocket connection duplicates

Optimisation (app close) | make WebSocketAppender thread safe

Optimisation (app close) | fix numerous potential places that cause segfault on app close

Build | build with latest GNU compilers (v 6).

IEC60870 | IEC103 events without timetag fix

Formula | fix Formula output controller trying to execute DO CMD until it succeeds.

Formula | fix Formula when using another formula object as argument, that is further down the list in GWS (#2794)

2017.01.31-next-01-3eefdf3

Optimisation | all telem-app optimisations merge

IEC60870 | fix control state conatiner in IEC 101 for GWM with IO board

Protocol | control state logger improved logs

2016.12.02-next-01-a502dae Don't use on VMX25 Don't use on GWM with DO

SPA-Bus | ABB SPAC330C feature

IEC61850 | 101 support multiple DO with same v-addresses (multiple rows with same v-addresses)

2016.11.23-next-01-0260688 Don't use on VMX25 Don't use on GWM with DO

IEC61850 | 103 support multiple DO with same v-addresses (multiple rows with same v-addresses)

2016.11.15-next-02-b43c191 Don't use on VMX25 Don't use on GWM with DO

Localization | Change non-ASCII characters to * in Port and Device commments (#2751)

2016.11.15-next-01-5dc3aa7 Don't use on VMX25 Don't use on GWM with DO

IEC61850 | 104 event loss after disconnect fix (#2725)

2016.11.04-next-02-3a9808a Don't use on VMX25 Don't use on GWM with DO

Database | Set object flags to Invalid instead of NotTopical on startup

SPA-Bus | objects not going not topical on Timeout fix

SPA-Bus | potential segfault fix

2016.10.08-next-01-c91481f

IEC-101,104 | GI Switch per object (requires GWS 6.1.0.2068+)

IEC-101,104 | DO can have 2 downstream addresses (like 1/2)

2016.10.05-next-06-bb13408

Protocol | Remove event sorting by time when sending to upstream Retract 2016.09.19-next-01-c0127ec additions

Protocol | upstream events faster

IEC-103 | Micom workarounds

2016.10.03-next-02-1cb7e5f

Protocol | time sync interval from XML implementation

SPA-Bus | fix event time is it is assumed that event came before last minut change

SPA-Bus | request L, then poll once and change device

SPA-Bus | delay next device for 50ms after timesync

2016.09.26-next-01-91e178f

SPA-Bus | Scaling fix (#2689)

Logging | raw port log in ASCII

2016.09.23-next-01-00fde37 (#2721)

SPA-Bus | event can have effect on multiple objects

2016.09.19-next-01-c0127ec (#2693)

Protocol | Events are sent upstream in order of the lowest timetag Retracted in 2016.10.05-next-06-bb13408

2016.09.08-next-01-526b387

IEC | fix IEC 101 UB variable length frame bigger than 255 issue

Formula | fix double masking in fomrula ???

2016 year device fw and GWS 6.1.0.2064

NoMainLog for formula

2016.08.25-next-03-b45984d

Modbus | ai_bit DI type

Modbus | DO: define ON and OFF address in the same cell

improved logging

SPA-Bus | poll all

2016.08.23-next-01-d702b81

Logging | fine tuned device initialization logging. Old device oriented (GW6, RTA)

fix DO Inversion bug (#2702)

2016.05.11-next-02-e02304a

SPA-Bus | minor fixes for rare nack and timeout cases

SPA-Bus | commented out object sorting

2016.05.04-next-01-64e4492

SPA-Bus | protocol subtype for ABB ref542

SPA-Bus | poll L messages after 5 object poll requests

SPA-Bus | mode 1 implementation: poll multiple objects in one request (#2635)

SPA-Bus | DO: define ON and OFF address in the same cell

SPA-Bus | channel number definable for every event number (#2637)

SPA-Bus | event numbers for Intermediate and Error states

SPA-Bus | fallback fixes (#2658)

SPA-Bus | switch between devices on same port after L message

SPA-Bus | define incoming DI object type (Dobule/Single) (#2654)

SD card licence implementation (#2592)

remove non ASCII characters from object comment (#2577)

[22.03.2016]

1-wire segfault on bing temp. change fix (#2640)

[11.03.2016]

IEC-104 object type priorities fix. Big amounts of AI data prevented DI events propagation. (#2625)

[23.02.2016]

webserver v2 IE11 not working fix

[10.02.2016]

NEW_DATABASE formulas numerous fixes

ADDED LIB TO PROJECT: fastformat

logging optimizations using fastformat. VMX25 up to 10x faster

[16.12.2015]

license additions to support no modem GWM (#2565)

[17.11.2015]

longer interval for some tasks

SyncDatabaseToFile 2s->5s

ProcessRetranslation 10ms->500ms

explicitly sync db backup to non-volatile memory only on reset/low-power.

[06.11.2015]

IEC-101/104 QOC (Qualifier of command) implementation (#2495)

[05.11.2015]

AI scaling rewrite (COMPATIBILITY BREAK)

virtual I/O object pair crash app if invalid address fix (#2572)

[30.10.2015]

web-server v2 shows device eth info (#2532)

[16.10.2015]

fix SPA-Bus polling delay (#2546)

[14.10.2015]

IEC DO_FN | IEC101/104 type 105 C_RP_NA_1 (reset process) implementation (#2498)

IEC DO_FN | IEC101/104 GI command via DO implementation (#2499)

[13.10.2015]

zero value deadband implementation (#2536)

[24.09.2015]

DO/AO stops IEC-101 messages fix for devices using old database (#2527)

allow bigger conf size for NEW_DATABASE devices

SETUP_WITH_XML_BIN_SIZE 500KB->1.5MB

EXTRACTED_XML_SETUP_SIZE 6MB->20MB

[07.09.2015]

GWM IO-board + 101-104 conversion not working fix (#2520)

[25.08.2015]

IEC-61850 mem-leak/consumption fixes

remove BIT_INVALID_TIME from BIT_VALUE_CHANGED_MASK

[22.08.2015]

devie booting time nnX times faster (#2472)

kernel 4 Changelog since 2017

2017.08.22

fix GW DNS service

2017.02.10

fix sftp access

fix configuring SSH from GWS

kernel 2 Changelog since 2013

2017.07.12

log4cxx | patch for socket appender

pack_logs | pack modem history log

init | fix spamming logs (S48, S61m S99)

fw_update | fix errors on fw update (S12usb)

init | fix spamming logs on stop (S37)

modem | fix handling huawei modems

WebServer | Restore syslog options

2017.04.17-next-08-af772c0

update | Additional checks in post-update scripts for GWM rev.1 FTDI IO Board

2017.04.05-next-07-65a2e5a

pack_logs now packs all existing console logs and eeprom log if exists

2017.04.03-next-03-49423a0

fix enabling peripheral power on startup with usbs suspended (fixes old GWM53 FTDI IO Board)

2017.01.31-next-01-3eefdf3

remove cifs support from vmx25 kernel. No more space left on device.

2016.11.04-next-01-51a8c40 Don't use on VMX25 Don't use on GWM with DO

IEC-101,104 | DO invert fix sending ACK with inverted address

init | S99phy fix toggling LAN power and wait longer

init | fix starting modem then date is in the start of epoch (1970)

init | Script fixes for fresh device with linux default time

2016.10.19-next-09-3e89e79 Don't use on VMX25 Don't use on GWM with DO

CIFS support in kernel for network mounts !! This change bricks VMX25. Removed from VMX25 after 30.01.2017

2016.10.08-next-01-c91481f

init | optimizations for FTDI eeprom software

init | getwdbootmsg fixes

init | major refactoring. Performance & readability fixes

2016.10.03-next-02-1cb7e5f

Syslog | Add possibility to change loglevel and remote server port

ntp | do not restart ntp if only gps is configured (2711)

ntp | avoid frequent ntp restarts by other scripts

modem | avoid frequent modem restart by multiple scripts (only 1 restart allowed per one minute).

modem | rewrite telit modem reseting as described in telit manual

init | fix socat sometimes creating /dev/tty* as ordinary file instead of letting modem driver to do it.

init | performance fixes

2016.07.28-next-06-3d426af

Device CPU frequency lowered from 1.2GHz to 1.0GHz | Improved ssh key generation and license cheking

[11.02.2016]

physical interface checker script implementation

[10.02.2016]

ADDED LIB TO PROJECT: fastformat

[26.01.2016]

GWS 'Get logs' acquires n+1 more rotating logs

[23.07.2015]

ADDED LIB TO PROJECT: boost_chrono to source.pro (websocketpp 0.6.0 depends)

[08.06.2015]

application segmentation fault fix (2429)

[27.04.2015]

DI fallback bug fix (2312)

[23.04.2015]

DI object double inversion bug fix (2345)

[21.04.2015]

no flags not working fix (2194)

[24.03.2015]

Periodical GI implementation for all protocols (every 5th minute of hour)

[16.03.2015]

Telem Master protocol implementation

[29.01.2015]

IEC-10x ASDU transfer implementation

[30.10.2014]

IEC-101B serial communication improvements

[23.10.2014]

No main/CSV log for individual objects

2014.01.13-next-01-2a5df30

added uINT16 (unsigned 16bit integer) in modbus protocol. (also update gws)

2014.01.09-next-01-2fae2d9

fix IEC104 bug in GW6

2014.01.07-next-01-8180155

fix fallback (GW6e and GWM), "NONE" protocol, device "in use"=no, FP-to-normalised conversion, deadband issues, IEC104 bug in GW6e. (also update gws)

2013.11.18-next-04

fix IEC-104 bug (mark data as NT if connection to IEC-104 slave is lost and parameter "failed query count for disabling contr." > 1)

2013.11.12-next01

fix AO feedback bug in GW6 and RTA-A

2013.11.04-next

time invalid flag for GW6 and RTA-A (also requires DSP/RTC software update!)

2013.10.24-next

IEC101-to-IEC104 short time to long time conversion

2013.09.16-next07

configurable COT=2 Bytes for IEC101b

2013.09.09-next01

configurable COT=2 Bytes for IEC101ub

2013.07.12-next02

write modem status to /var/log/modem.st

Old Devices RTA-A and GW6

Latest Firmware

Last fw version GW6: 2015.12.11-develop-01-104a492

Last fw version RTA-A M502: 2015.12.11-develop-01-104a492

Last fw version RTA-A M501: 2015.12.11-develop-01-104a492

GW6-1206

Timezones for ports and system.

Userland

dnsmasq
iperf

Kernel

iptables: Support for -m limit. For instance:

 /usr/sbin/iptables -t filter -A INPUT -p tcp --dport 2404 --sport 1024:65535 -m state --state NEW -m limit --limit 25/minute --limit-burst 100 -j ACCEPT

tc: Basic support. For instance:

/sbin/tc qdisc del dev eth0 root    2> /dev/null > /dev/null
/sbin/tc qdisc del dev eth0 ingress 2> /dev/null > /dev/null

/sbin/tc qdisc add dev eth0 handle ffff: ingress
/sbin/tc filter add dev eth0 parent ffff: protocol ip prio 1 u32 match ip src 0.0.0.0/0 police rate 512kbit burst 1m drop flowid :1

/sbin/tc qdisc add dev eth0 root handle 1: cbq avpkt 1000 bandwidth 20mbit 
/sbin/tc class add dev eth0 parent 1: classid 1:1 cbq rate 512kbit allot 1500 prio 1 bounded isolated 
/sbin/tc class add dev eth0 parent 1: classid 1:2 cbq rate 512kbit allot 1500 prio 2 bounded isolated
/sbin/tc class add dev eth0 parent 1: classid 1:3 cbq rate 512kbit allot 1500 prio 3 bounded isolated
/sbin/tc filter add dev eth0 parent 1: protocol ip prio 16 u32 match ip protocol 1 0xff flowid 1:1
/sbin/tc filter add dev eth0 parent 1: protocol ip prio 1 u32 match ip sport 80 0xffff flowid 1:2
/sbin/tc filter add dev eth0 parent 1: protocol ip prio 1 u32 match ip sport 22 0xffff flowid 1:3

GW6-1204

IEC104: Respond to message sent to broadcast ASDU (0xFFFF)
IEC-62056: mask incoming data with 0x7F (ASCII protocol)
Serial ports: Suppress echo
WebPage: Long awaited by all interenet browsers the favicon.ico

GW6-1202

IEC104: Fix possible event loss on ethernet cable removal.
Formula: Do not generate control event, on first successful calculation.

GW6-1200

Firmware version readable through internal WebServer
Fix possible event loss when lots of changes arrive for one input.
GPRS-modem protocol: if connection to internet is lost, all TCP client connections are closed
IEC104: force long-time format

GW6-1198

IEC101/103 Unbalanced Master: add feature polling delay
When sending a control operation over IEC103 channel with many devices. Speed up receiving of control response.

GW6-1196

Connection loss with RTC-board does not result in watchdog reset.
- Symptoms: device will reset after 20 seconds of running.
Device will write system boot count and application start count to console.log. Latest values can be found in /var/local/telem/stats

RTA-A-1192

RTA-A: possible to define DO object to clear annunciator LED 's
Modbus Master: Fix receiving of negative 16bit normalized values.

GW6-1190

Added new update pack type app-only.
- Note: This update pack type should only be used on device with SW version 1190 or later.
- This update will not overwrite system files - less chance for bricking if something goes wrong (accidental power loss or reset).
Generate /etc/network/interfaces file once after receiving new setup.
New protocol type IEC ^ Setup
- Only reading and writing of device setup is allowed on this Port.
- Allows faster booting of device with a lot of unused Up-channel ports.

GwLin Changelog

Contents

Info below not updated anymore, see redmine roadmap for latest data

TELEM-AGC, TELEM-GW6e, TELEM-GWM53 and TELEM-GWM25

Recommended software

kernel4:

kernel2(pre 2014 devices):

Firmware downgrade

telem-app Changelog for kernel 4

telem-app Changelog for kernel 2

kernel 4 Changelog since 2017

kernel 2 Changelog since 2013

Old Devices RTA-A and GW6

Latest Firmware

GW6-1206

Userland

Kernel

GW6-1204

GW6-1202

GW6-1200

GW6-1198

GW6-1196

RTA-A-1192

GW6-1190

Navigation menu

GwLin Changelog

Info below not updated anymore, see redmine roadmap for latest data

TELEM-AGC, TELEM-GW6e, TELEM-GWM53 and TELEM-GWM25

Recommended software

kernel4:

kernel2(pre 2014 devices):

Firmware downgrade

telem-app Changelog for kernel 4

telem-app Changelog for kernel 2

kernel 4 Changelog since 2017

kernel 2 Changelog since 2013

Old Devices RTA-A and GW6

Latest Firmware

GW6-1206

Userland

Kernel

GW6-1204

GW6-1202

GW6-1200

GW6-1198

GW6-1196

RTA-A-1192

GW6-1190

Navigation menu

Search