View source for Get verbose output via console cable from GW

Connect your console cable to the device, access is via ''minicom'' or relevant.

Press any key when prompted:
<pre>Hit any key to stop autoboot:  1</pre>

Input <pre>edit /env/config</pre>

Find line <pre>bootargs="otg_mode=host"</pre>

Change it to <pre>bootargs="otg_mode=host console=ttymxc0,115200"</pre>

Press ''ctrl + d'' to save file.

To make changes persistent, input <pre>saveenv</pre>

Input <pre>reset</pre> to reboot

[[Kasutaja:MarkTomm|MarkTomm]] 3. detsember 2014, kell 20:33 (EET)