Flashing PXA27M bootloader - Revision history

Roland at 12:04, 12 August 2014

2014-08-12T12:04:43Z

← Older revision		Revision as of 12:04, 12 August 2014
Line 75:		Line 75:
	#* minicom		#* minicom
	#** Use settings 38400 8N1		#** Use settings 38400 8N1
	#* set ipaddr 10.0.0.22;set serverip 10.0.0.16;erase 1:0-2;tftp x-load.bin;cp.b a1000000 0 400;tftp u-boot.bin;cp.b a1000000 800 $(filesize);reset		#* set ipaddr 10.0.0.23;set serverip 10.0.0.10;erase 1:0-2;tftp Telem-GW6/x-load.bin;cp.b a1000000 0 400;tftp Telem-GW6/u-boot.bin;cp.b a1000000 800 $(filesize);reset

	== Reference material ==		== Reference material ==
	*[http://voipac.com/downloads/jtag/doc/vpaclink-jtag.txt Installing OpenOCD]		*[http://voipac.com/downloads/jtag/doc/vpaclink-jtag.txt Installing OpenOCD]
	*[http://www.howtogeek.com/howto/ubuntu/how-to-customize-your-ubuntu-kernel/ How to customize your Ubuntu kernel]		*[http://www.howtogeek.com/howto/ubuntu/how-to-customize-your-ubuntu-kernel/ How to customize your Ubuntu kernel]

2013-05-24T09:16:50Z

Install OpenOCD

← Older revision		Revision as of 09:16, 24 May 2013
Line 49:		Line 49:
	ln -s libftd2xx.so.0 libftd2xx.so		ln -s libftd2xx.so.0 libftd2xx.so
	</syntaxhighlight>		</syntaxhighlight>
	* tar xzfv ~~openocd_1~~.0.1383_i386.tar.gz		* tar xzfv Openocd_1.0.1383_i386.tar.gz
	* sudo dpkg -i ~~Openocd_1~~.0.1383_i386.deb		* sudo dpkg -i openocd_1.0.1383_i386.deb
	** When trying to install this on a 64bit system you need to '''--force-architecture''' or you'll get an error.		** When trying to install this on a 64bit system you need to '''--force-architecture''' or you'll get an error.
	*** sudo dpkg --force-architecture -i ~~Openocd_1~~.0.1383_i386.deb		*** sudo dpkg --force-architecture -i openocd_1.0.1383_i386.deb

	== Using OpenOCD ==		== Using OpenOCD ==

2013-05-24T09:15:57Z

← Older revision		Revision as of 09:15, 24 May 2013
Line 50:		Line 50:
	</syntaxhighlight>		</syntaxhighlight>
	* tar xzfv openocd_1.0.1383_i386.tar.gz		* tar xzfv openocd_1.0.1383_i386.tar.gz
	* dpkg -i ~~openocd_1~~.0.1383_i386.deb		* sudo dpkg -i Openocd_1.0.1383_i386.deb
	** When trying to install this on a 64bit system you need to '''--force-architecture''' or you'll get an error.		** When trying to install this on a 64bit system you need to '''--force-architecture''' or you'll get an error.
			*** sudo dpkg --force-architecture -i Openocd_1.0.1383_i386.deb

	== Using OpenOCD ==		== Using OpenOCD ==

2013-02-28T12:19:49Z

← Older revision		Revision as of 12:19, 28 February 2013
Line 59:		Line 59:
	#** '''Error: unable to open ftdi device: 18'''		#** '''Error: unable to open ftdi device: 18'''
	#*** OpenOCD needs usbfs		#*** OpenOCD needs usbfs
	#*** mount -t usbfs none /proc/bus/usb		#*** sudo mount -t usbfs none /proc/bus/usb
	#** '''Error: unable to open ftdi device: 2'''		#** '''Error: unable to open ftdi device: 2'''
	#*** You need root privileges		#*** You need root privileges

2012-02-21T12:19:20Z

Using OpenOCD

← Older revision		Revision as of 12:19, 21 February 2012
Line 66:		Line 66:
	# Start second terminal, use telnet to connect to OpenOCD daemon.		# Start second terminal, use telnet to connect to OpenOCD daemon.
	## telnet localhost 4444		## telnet localhost 4444
			##* you can stack the next commands
			##**reset halt; load_image /tftpboot/u-boot_noboot.bin 0x5c010000; resume 0x5c010000
	## reset halt		## reset halt
	## load_image /tftpboot/u-boot_noboot.bin 0x5c010000		## load_image /tftpboot/u-boot_noboot.bin 0x5c010000
Line 73:		Line 75:
	#** Use settings 38400 8N1		#** Use settings 38400 8N1
	#* set ipaddr 10.0.0.22;set serverip 10.0.0.16;erase 1:0-2;tftp x-load.bin;cp.b a1000000 0 400;tftp u-boot.bin;cp.b a1000000 800 $(filesize);reset		#* set ipaddr 10.0.0.22;set serverip 10.0.0.16;erase 1:0-2;tftp x-load.bin;cp.b a1000000 0 400;tftp u-boot.bin;cp.b a1000000 800 $(filesize);reset


	== Reference material ==		== Reference material ==
	*[http://voipac.com/downloads/jtag/doc/vpaclink-jtag.txt Installing OpenOCD]		*[http://voipac.com/downloads/jtag/doc/vpaclink-jtag.txt Installing OpenOCD]
	*[http://www.howtogeek.com/howto/ubuntu/how-to-customize-your-ubuntu-kernel/ How to customize your Ubuntu kernel]		*[http://www.howtogeek.com/howto/ubuntu/how-to-customize-your-ubuntu-kernel/ How to customize your Ubuntu kernel]

2012-02-21T10:55:17Z

Install OpenOCD

← Older revision		Revision as of 10:55, 21 February 2012
Line 43:		Line 43:
	* Create symlinks for the libftd2xx by using the following commands:		* Create symlinks for the libftd2xx by using the following commands:
	<syntaxhighlight lang="bash">		<syntaxhighlight lang="bash">
			sudo cp libftd2xx.so.0.4.13 /usr/lib/
	cd /usr/lib		cd /usr/lib
	ln -s libftd2xx.so.0.4.13 libftd2xx.so.0.4		ln -s libftd2xx.so.0.4.13 libftd2xx.so.0.4
	ln -s libftd2xx.so.0.4~~.13~~ libftd2xx.so.0		ln -s libftd2xx.so.0.4 libftd2xx.so.0
	ln -s libftd2xx.so.0~~.4.13~~ libftd2xx.so		ln -s libftd2xx.so.0 libftd2xx.so
	</syntaxhighlight>		</syntaxhighlight>
	* tar xzfv openocd_1.0.1383_i386.tar.gz		* tar xzfv openocd_1.0.1383_i386.tar.gz

2012-02-21T10:43:58Z

Install OpenOCD

← Older revision		Revision as of 10:43, 21 February 2012
Line 40:		Line 40:

	=== Install OpenOCD ===		=== Install OpenOCD ===
	# Copy libftd2xx.so to your /usr/lib folder		* Copy libftd2xx.so to your /usr/lib folder
	# Create symlinks for the libftd2xx by using the following commands:		* Create symlinks for the libftd2xx by using the following commands:
	<syntaxhighlight lang="bash">		<syntaxhighlight lang="bash">
	cd /usr/lib		cd /usr/lib
Line 48:		Line 48:
	ln -s libftd2xx.so.0.4.13 libftd2xx.so		ln -s libftd2xx.so.0.4.13 libftd2xx.so
	</syntaxhighlight>		</syntaxhighlight>
	# tar xzfv openocd_1.0.1383_i386.tar.gz		* tar xzfv openocd_1.0.1383_i386.tar.gz
	# dpkg -i openocd_1.0.1383_i386.deb		* dpkg -i openocd_1.0.1383_i386.deb
	#* When trying to install this on a 64bit system you need to '''--force-architecture''' or you'll get an error.		** When trying to install this on a 64bit system you need to '''--force-architecture''' or you'll get an error.

	== Using OpenOCD ==		== Using OpenOCD ==
	# Power up target board and connect JTAG		# Power up target board and connect JTAG

2012-02-21T10:43:15Z

← Older revision		Revision as of 10:43, 21 February 2012
Line 42:		Line 42:
	# Copy libftd2xx.so to your /usr/lib folder		# Copy libftd2xx.so to your /usr/lib folder
	# Create symlinks for the libftd2xx by using the following commands:		# Create symlinks for the libftd2xx by using the following commands:
	#* cd /usr/lib		<syntaxhighlight lang="bash">
	#* ln -s libftd2xx.so.0.4.13 libftd2xx.so.0.4		cd /usr/lib
	#* ln -s libftd2xx.so.0.4.13 libftd2xx.so.0		ln -s libftd2xx.so.0.4.13 libftd2xx.so.0.4
	#* ln -s libftd2xx.so.0.4.13 libftd2xx.so		ln -s libftd2xx.so.0.4.13 libftd2xx.so.0
			ln -s libftd2xx.so.0.4.13 libftd2xx.so
			</syntaxhighlight>
	# tar xzfv openocd_1.0.1383_i386.tar.gz		# tar xzfv openocd_1.0.1383_i386.tar.gz
	# dpkg -i openocd_1.0.1383_i386.deb		# dpkg -i openocd_1.0.1383_i386.deb

2012-02-21T10:41:54Z

Ubuntu 11.x

← Older revision		Revision as of 10:41, 21 February 2012
Line 29:		Line 29:
	# Enable CONFIG_USB_DEVICEFS		# Enable CONFIG_USB_DEVICEFS
	make xconfig		make xconfig

			# after making changes to kernel it's time to compile
			make-kpkg clean
			fakeroot make-kpkg -j6 --initrd --revision=1.0 kernel_image

			# install new kernel, edit filename to what was generated
			sudo dpkg -i ../linux-image-

	</syntaxhighlight>		</syntaxhighlight>

2012-02-20T15:49:54Z

@@ Line 14: / Line 14: @@
   Enable CONFIG_USB_DEVICEFS option in kernel options
 [http://www.howtogeek.com/howto/ubuntu/how-to-customize-your-ubuntu-kernel/ how-to-customize-your-ubuntu-kernel]
 === Install OpenOCD ===
 # Copy libftd2xx.so to your /usr/lib folder