Objects Tab: Difference between revisions
No edit summary |
No edit summary |
||
| (7 intermediate revisions by the same user not shown) | |||
| Line 2: | Line 2: | ||
First object of every device is used as the communication status signal of the device. If its value is "1" then communication with this device is broken. If the value is "0", communication with the device is OK. <br /> | First object of every device is used as the communication status signal of the device. If its value is "1" then communication with this device is broken. If the value is "0", communication with the device is OK. <br /> | ||
Columns:<br /> | '''Columns''':<br /> | ||
Type | '''Type:''' Object’s type: digital input (DI), digital output (DO), analog input (AI), counter (CN)<br /> | ||
Sub Type^ | '''Sub Type^:''' Object’s subtype for uplink.<br /> | ||
{| | {| | ||
|- | |- | ||
| Line 21: | Line 21: | ||
Sub Type v | '''Sub Type v:''' Object’s subtype for downlink. | ||
{| | |||
|- | |||
|DI digital input:||Normal | |||
|- | |||
| ||Fallback | |||
|- | |||
|DO digital output:||Direct Execute | |||
Invert: Object’s value will be inverted | |- | ||
Fn.code: Function code on the IEC 60870-5-103 protocol | | ||Select Execute | ||
Info no: Information number on the IEC 60870-5-103 protocol | |- | ||
Index: Object index on the IEC 60870-5-103 protocol. | |AI Analog input: || | ||
It indicates the order number of the object in message types 3 and 9 of analog measurements. In IEC 60850 used to match “Integer and Enum Values” for example AutoRecSt=”Successful” index should be 3. | |} | ||
Object.Addr:Object’s downlink address | '''Invert:''' Object’s value will be inverted<br /> | ||
61850 v: 61850 address (loaded from device’s XML file), can be modified manually. | '''Fn.code:''' Function code on the IEC 60870-5-103 protocol<br /> | ||
Object.Addr ^: Object’s uplink address | '''Info no:''' Information number on the IEC 60870-5-103 protocol<br /> | ||
It is possible to send the same object to control centre with different addresses by creating several object with identical downlink addresses and different uplink addresses. | '''Index''': Object index on the IEC 60870-5-103 protocol.<br /> | ||
Comment: comments of devices | It indicates the order number of the object in message types 3 and 9 of analog measurements. In IEC 60850 used to match “Integer and Enum Values” for example AutoRecSt=”Successful” index should be 3.<br /> | ||
DB %Fs: Deadband (% of full scale, Outp.max-Outp.min). | '''Object.Addr:'''Object’s downlink address<br /> | ||
If the value has changed less than the deadband then it is not spontaneously transferred. | '''61850 v:''' 61850 address (loaded from device’s XML file), can be modified manually.<br /> | ||
Inp. Min, Inp. Max: Minimum and maximum values of analog measurement (before scaling). Necessary when value scaling is needed. (floating point to normalized) | '''Object.Addr ^:''' Object’s uplink address<br /> | ||
Outp. Min, Outp. Max: Minimum and maximum values of analog measurement. Necessary when value scaling is needed. (normalized to floating point) | It is possible to send the same object to control centre with different addresses by creating several object with identical downlink addresses and different uplink addresses.<br /> | ||
Forb. Ports ^: Uplink port to which the object’s value transfer is blocked. | '''Comment:''' comments of devices<br /> | ||
To select uplink ports, which should not be used for transferring these object values, double-click on the cell of the Forb. Ports^ column and select the corresponding ports from the window that has appeared. | '''DB %Fs:''' Deadband (% of full scale, Outp.max-Outp.min).<br /> | ||
On Ev. Nr; Off Ev. Nr: Corresponding event number used in SPA-bus | If the value has changed less than the deadband then it is not spontaneously transferred.<br /> | ||
Ch. Nr.: Channel nr. for SPA-bus communication protocol | '''Inp. Min, Inp. Max:''' Minimum and maximum values of analog measurement (before scaling). Necessary when value scaling is needed. (floating point to normalized)<br /> | ||
NoFlags: If set to Yes, removes Invalid and Not Topical flags from object status. Used for objects, which statuses are not received with General Interval time (short circuit current, fault distance etc.) | '''Outp. Min, Outp. Max:''' Minimum and maximum values of analog measurement. Necessary when value scaling is needed. (normalized to floating point)<br /> | ||
'''Forb. Ports ^:''' Uplink port to which the object’s value transfer is blocked. <br /> | |||
To select uplink ports, which should not be used for transferring these object values, double-click on the cell of the Forb. Ports^ column and select the corresponding ports from the window that has appeared.<br /> | |||
'''On Ev. Nr; Off Ev. Nr:''' Corresponding event number used in SPA-bus<br /> | |||
'''Ch. Nr.:''' Channel nr. for SPA-bus communication protocol<br /> | |||
'''NoFlags:''' If set to Yes, removes Invalid and Not Topical flags from object status. Used for objects, which statuses are not received with General Interval time (short circuit current, fault distance etc.)<br /> | |||
Adding Objects | '''Adding Objects'''<br /> | ||
By clicking on the „+“ button, a new object with default settings is added. Objects can also be added with a right click on the device tab card. Extended control menu appears where user can choose number of objects to add, into which device objects will be added, where in the list the object will be located, user can also choose if new object will be with default setup or copy some other object. | By clicking on the „+“ button, a new object with default settings is added. Objects can also be added with a right click on the device tab card. Extended control menu appears where user can choose number of objects to add, into which device objects will be added, where in the list the object will be located, user can also choose if new object will be with default setup or copy some other object. | ||
Removing Objects | '''Removing Objects'''<br /> | ||
To remove a object, click the „-“ button. Objects can also be removed with a right click on the device tab card. Window appears where user can choose which objects to remove. | To remove a object, click the „-“ button. Objects can also be removed with a right click on the device tab card. Window appears where user can choose which objects to remove. | ||
Hints | '''Hints'''<br /> | ||
• Repeated object addresses are shown on yellow background. | • Repeated object addresses are shown on yellow background.<br /> | ||
• Lower lewel object can have multiple Object.Addr ^, duplicate object parameters and add new Object.Addr ^ | • Lower lewel object can have multiple Object.Addr ^, duplicate object parameters and add new Object.Addr ^<br /> | ||
Latest revision as of 12:43, 20 March 2015
Objects tab card is used to define all parameters of I/O points. Each device as its own object list.
First object of every device is used as the communication status signal of the device. If its value is "1" then communication with this device is broken. If the value is "0", communication with the device is OK.
Columns:
Type: Object’s type: digital input (DI), digital output (DO), analog input (AI), counter (CN)
Sub Type^: Object’s subtype for uplink.
| DI digital input: | Single |
| Double | |
| DO digital output: | Same as Sub Type v |
| AI Analog input: | Normalized |
| Floating point | |
| Step position |
Sub Type v: Object’s subtype for downlink.
| DI digital input: | Normal |
| Fallback | |
| DO digital output: | Direct Execute |
| Select Execute | |
| AI Analog input: |
Invert: Object’s value will be inverted
Fn.code: Function code on the IEC 60870-5-103 protocol
Info no: Information number on the IEC 60870-5-103 protocol
Index: Object index on the IEC 60870-5-103 protocol.
It indicates the order number of the object in message types 3 and 9 of analog measurements. In IEC 60850 used to match “Integer and Enum Values” for example AutoRecSt=”Successful” index should be 3.
Object.Addr:Object’s downlink address
61850 v: 61850 address (loaded from device’s XML file), can be modified manually.
Object.Addr ^: Object’s uplink address
It is possible to send the same object to control centre with different addresses by creating several object with identical downlink addresses and different uplink addresses.
Comment: comments of devices
DB %Fs: Deadband (% of full scale, Outp.max-Outp.min).
If the value has changed less than the deadband then it is not spontaneously transferred.
Inp. Min, Inp. Max: Minimum and maximum values of analog measurement (before scaling). Necessary when value scaling is needed. (floating point to normalized)
Outp. Min, Outp. Max: Minimum and maximum values of analog measurement. Necessary when value scaling is needed. (normalized to floating point)
Forb. Ports ^: Uplink port to which the object’s value transfer is blocked.
To select uplink ports, which should not be used for transferring these object values, double-click on the cell of the Forb. Ports^ column and select the corresponding ports from the window that has appeared.
On Ev. Nr; Off Ev. Nr: Corresponding event number used in SPA-bus
Ch. Nr.: Channel nr. for SPA-bus communication protocol
NoFlags: If set to Yes, removes Invalid and Not Topical flags from object status. Used for objects, which statuses are not received with General Interval time (short circuit current, fault distance etc.)
Adding Objects
By clicking on the „+“ button, a new object with default settings is added. Objects can also be added with a right click on the device tab card. Extended control menu appears where user can choose number of objects to add, into which device objects will be added, where in the list the object will be located, user can also choose if new object will be with default setup or copy some other object.
Removing Objects
To remove a object, click the „-“ button. Objects can also be removed with a right click on the device tab card. Window appears where user can choose which objects to remove.
Hints
• Repeated object addresses are shown on yellow background.
• Lower lewel object can have multiple Object.Addr ^, duplicate object parameters and add new Object.Addr ^