GwLin Changelog

TELEM-GW6e, TELEM-GWM53 and TELEM-GWM25

Milestones

• DNP3
• linux kernel 4.x

Changelog

• 2016.11.22-next-02-aff0af1

IEC-103 support multiple DO with same v-addresses

• 2016.11.15-next-02-b43c191

Change non-ASCII characters to * in Port and Device commments (2751)

• 2016.11.15-next-01-5dc3aa7

IEC-104 event loss after disconnect fix (2725)

• 2016.11.04-next-02-3a9808a

Set object flags to Invalid instead of NotTopical on startup

SPA-Bus objects not going not topical on Timeout fix

SPA-Bus potential segfault fix

• 2016.11.04-next-01-51a8c40

IEC-101,104 | DO invert fix sending ACK with inverted address

init | S99phy fix toggling LAN power and wait longer

init | fix starting modem then date is in the start of epoch (1970)

init | Script fixes for fresh device with linux default time

• 2016.10.19-next-09-3e89e79

CIFS support in kernel for network mounts

• 2016.10.08-next-01-c91481f

IEC-101,104 | GI Switch per object (requires GWS 6.1.0.2068+)

IEC-101,104 | DO can have 2 downstream addresses.

init | optimizations for FTDI eeprom software

init | getwdbootmsg fixes

init | major refactoring. Performance & readability fixes

• 2016.10.05-next-06-bb13408

Protocol | Remove event sorting by time when sending to upstream

Protocol | upstream events faster

IEC-103 | Micom workarounds

• 2016.10.03-next-02-1cb7e5f

Protocol | time sync interval from XML implementation

SPA-Bus | fix event time is it is assumed that event came before last minut change

SPA-Bus | request L, then poll once and change device

SPA-Bus | delay next device for 50ms after timesync

Syslog | Add possibility to change loglevel and remote server port

ntp | do not restart ntp if only gps is configured (2711)

ntp | avoid frequent ntp restarts by other scripts

modem | avoid frequent modem restart by multiple scripts (only 1 restart allowed per one minute).

modem | rewrite telit modem reseting as described in telit manual

init | fix socat sometimes creating /dev/tty* as ordinary file instead of letting modem driver to do it.

init | performance fixes

• 2016.09.26-next-01-91e178f

SPA-Bus | Scaling fix (2689)

Logging | raw port log in ASCII

• 2016.09.23-next-01-00fde37 (2721)

SPA-Bus | event can have effect on multiple objects

• 2016.09.19-next-01-c0127ec (2693)

Protocol | Events are sent upstream in order of the lowest timetag

• 2016.09.08-next-01-526b387

IEC | fix IEC 101 UB variable length frame bigger than 255 issue

Formula | fix double masking in fomrula ???

• 2016 year device fw and GWS 6.1.0.2064

NoMainLog for formula

• 2016.08.25-next-03-b45984d

Modbus | ai_bit DI type

Modbus | DO: define ON and OFF address in the same cell

improved logging

SPA-Bus | poll all

• 2016.08.23-next-01-d702b81

Logging | fine tuned device initialization logging. Old device oriented (GW6, RTA)

fix DO Inversion bug (2702)

• 2016.07.28-next-06-3d426af

Device CPU frequency lowered from 1.2GHz to 1.0GHz | Improved ssh key generation and license cheking

• 2016.05.11-next-02-e02304a !Use this if unsure!

SPA-Bus | minor fixes for rare nack and timeout cases

SPA-Bus | commented out object sorting

• 2016.05.04-next-01-64e4492

SPA-Bus | protocol subtype for ABB ref542

SPA-Bus | poll L messages after 5 object poll requests

SPA-Bus | mode 1 implementation: poll multiple objects in one request (2635)

SPA-Bus | DO: define ON and OFF address in the same cell

SPA-Bus | channel number definable for every event number (2637)

SPA-Bus | event numbers for Intermediate and Error states

SPA-Bus | fallback fixes (2658)

SPA-Bus | switch between devices on same port after L message

SPA-Bus | define incoming DI object type (Dobule/Single) (2654)

SD card licence implementation (2592)

remove non ASCII characters from object comment (2577)

• [22.03.2016]

1-wire segfault on bing temp. change fix (2640)

• [11.03.2016]

IEC-104 object type priorities fix. Big amounts of AI data prevented DI events propagation. (2625)

• [23.02.2016]

webserver v2 IE11 not working fix

• [11.02.2016]

physical interface checker script implementation

• [10.02.2016]

NEW_DATABASE formulas numerous fixes

ADDED LIB TO PROJECT: fastformat

logging optimizations using fastformat. VMX25 up to 10x faster

• [26.01.2016]

GWS 'Get logs' acquires n+1 more rotating logs

• [16.12.2015]

license additions to support no modem GWM (2565)

• [17.11.2015]

longer interval for some tasks

SyncDatabaseToFile 2s->5s

ProcessRetranslation 10ms->500ms

explicitly sync db backup to non-volatile memory only on reset/low-power.

• [06.11.2015]

IEC-101/104 QOC (Qualifier of command) implementation (2495)

• [05.11.2015]

AI scaling rewrite (COMPATIBILITY BREAK)

virtual I/O object pair crash app if invalid address fix (2572)

• [30.10.2015]

web-server v2 shows device eth info (2532)

• [16.10.2015]

fix SPA-Bus polling delay (2546)

• [14.10.2015]

IEC101/104 type 105 C_RP_NA_1 (reset process) implementation (2498)

IEC101/104 GI command via DO implementation (2499)

• [13.10.2015]

zero value deadband implementation (2536)

• [24.09.2015]

DO/AO stops IEC-101 messages fix for devices using old database (2527)

allow bigger conf size for NEW_DATABASE devices

SETUP_WITH_XML_BIN_SIZE 500KB->1.5MB

EXTRACTED_XML_SETUP_SIZE 6MB->20MB

• [07.09.2015]

GWM IO-board + 101-104 conversion not working fix (2520)

• [25.08.2015]

IEC-61850 mem-leak/consumption fixes

remove BIT_INVALID_TIME from BIT_VALUE_CHANGED_MASK

• [22.08.2015]

devie booting time nnX times faster (2472)

• [23.07.2015]

ADDED LIB TO PROJECT: boost_chrono to source.pro (websocketpp 0.6.0 depends)

• [08.06.2015]

application segmentation fault fix (2429)

• [27.04.2015]

DI fallback bug fix (2312)

• [23.04.2015]

DI object double inversion bug fix (2345)

• [21.04.2015]

no flags not working fix (2194)

• [24.03.2015]

Periodical GI implementation for all protocols (every 5th minute of hour)

• [16.03.2015]

Telem Master protocol implementation

• [29.01.2015]

IEC-10x ASDU transfer implementation

• [30.10.2014]

IEC-101B serial communication improvements

• [23.10.2014]

No main/CSV log for individual objects

• 2014.01.13-next-01-2a5df30

added uINT16 (unsigned 16bit integer) in modbus protocol. (also update gws)

• 2014.01.09-next-01-2fae2d9

fix IEC104 bug in GW6

• 2014.01.07-next-01-8180155

fix fallback (GW6e and GWM), "NONE" protocol, device "in use"=no, FP-to-normalised conversion, deadband issues, IEC104 bug in GW6e. (also update gws)

• 2013.11.18-next-04

fix IEC-104 bug (mark data as NT if connection to IEC-104 slave is lost and parameter "failed query count for disabling contr." > 1)

• 2013.11.12-next01

fix AO feedback bug in GW6 and RTA-A

• 2013.11.04-next

time invalid flag for GW6 and RTA-A (also requires DSP/RTC software update!)

• 2013.10.24-next

IEC101-to-IEC104 short time to long time conversion

• 2013.09.16-next07

configurable COT=2 Bytes for IEC101b

• 2013.09.09-next01

configurable COT=2 Bytes for IEC101ub

• 2013.07.12-next02

write modem status to /var/log/modem.st

Old Devices RTA-A and GW6

Latest Firmware

Last fw version GW6: 2015.12.11-develop-01-104a492

Last fw version RTA-A M502: 2014.12.23-next-01-f3f6d0b

Last fw version RTA-A M501: 2014.01.09-next-01-2fae2d9

GW6-1206

• Timezones for ports and system.

Userland

• dnsmasq
• iperf

Kernel

• iptables: Support for -m limit. For instance:

 /usr/sbin/iptables -t filter -A INPUT -p tcp --dport 2404 --sport 1024:65535 -m state --state NEW -m limit --limit 25/minute --limit-burst 100 -j ACCEPT

• tc: Basic support. For instance:

/sbin/tc qdisc del dev eth0 root    2> /dev/null > /dev/null
/sbin/tc qdisc del dev eth0 ingress 2> /dev/null > /dev/null

/sbin/tc qdisc add dev eth0 handle ffff: ingress
/sbin/tc filter add dev eth0 parent ffff: protocol ip prio 1 u32 match ip src 0.0.0.0/0 police rate 512kbit burst 1m drop flowid :1

/sbin/tc qdisc add dev eth0 root handle 1: cbq avpkt 1000 bandwidth 20mbit 
/sbin/tc class add dev eth0 parent 1: classid 1:1 cbq rate 512kbit allot 1500 prio 1 bounded isolated 
/sbin/tc class add dev eth0 parent 1: classid 1:2 cbq rate 512kbit allot 1500 prio 2 bounded isolated
/sbin/tc class add dev eth0 parent 1: classid 1:3 cbq rate 512kbit allot 1500 prio 3 bounded isolated
/sbin/tc filter add dev eth0 parent 1: protocol ip prio 16 u32 match ip protocol 1 0xff flowid 1:1
/sbin/tc filter add dev eth0 parent 1: protocol ip prio 1 u32 match ip sport 80 0xffff flowid 1:2
/sbin/tc filter add dev eth0 parent 1: protocol ip prio 1 u32 match ip sport 22 0xffff flowid 1:3

GW6-1204

• IEC104: Respond to message sent to broadcast ASDU (0xFFFF)
• IEC-62056: mask incoming data with 0x7F (ASCII protocol)
• Serial ports: Suppress echo
• WebPage: Long awaited by all interenet browsers the favicon.ico

GW6-1202

• IEC104: Fix possible event loss on ethernet cable removal.
• Formula: Do not generate control event, on first successful calculation.

GW6-1200

• Firmware version readable through internal WebServer
• Fix possible event loss when lots of changes arrive for one input.
• GPRS-modem protocol: if connection to internet is lost, all TCP client connections are closed
• IEC104: force long-time format

GW6-1198

• IEC101/103 Unbalanced Master: add feature polling delay
• When sending a control operation over IEC103 channel with many devices. Speed up receiving of control response.

GW6-1196

• Connection loss with RTC-board does not result in watchdog reset.
  • Symptoms: device will reset after 20 seconds of running.
• Device will write system boot count and application start count to console.log. Latest values can be found in /var/local/telem/stats

RTA-A-1192

• RTA-A: possible to define DO object to clear annunciator LED 's
• Modbus Master: Fix receiving of negative 16bit normalized values.

GW6-1190

• Added new update pack type app-only.
  • Note: This update pack type should only be used on device with SW version 1190 or later.
  • This update will not overwrite system files - less chance for bricking if something goes wrong (accidental power loss or reset).
• Generate /etc/network/interfaces file once after receiving new setup.
• New protocol type IEC ^ Setup
  • Only reading and writing of device setup is allowed on this Port.
  • Allows faster booting of device with a lot of unused Up-channel ports.