GW6e Conformace Test: Difference between revisions

From Phobos Wiki
Jump to navigation Jump to search
No edit summary
 
(4 intermediate revisions by the same user not shown)
Line 1: Line 1:
== GW6e Conformace Test ==
 
{| class="wikitable"
|-
! Implemented transmission system
|-
| Unbalanced system || -
|-
! Network configuration
|-
| Point-to-point || -
|-
| Multidrop || -
|-
! PHYSICAL LAYER
|-
! Transmission speed
|-
| 1200 bit/s || -
|-
| 2400 bit/s || -
|-
| 4800 bit/s || -
|-
| 9600 bit/s || -
|-
| 19200 bit/s || -
|-
! LINK LAYER
|-
! Link transmission procedure
|-
| Unbalanced transmission || -
|-
! Address field of the link
|-
| One octet || -
|-
| Two octets || -
|-
! Frame length
|-
| Unstructured || -
|-
! Common address of ASDU
|-
| One octet || -
|-
! Information object address
|-
| Two octets || -
|-
| Three octets || -
|-
| Unstructured || -
|-
! Cause of transmission
|-
| One octet || -
|-
! SELECTION OF STANDARD ASDUS
|-
! Process information in monitor direction
|-
| <1> := Single-point information M_SP_NA_1|| -
|-
| <2> := Single-point information with time tag M_SP_TA_1 || -
|-
| <3> := Double-point information M_DP_NA_1 || -
|-
| <4> := Double-point information with time tag M_DP_TA_1 || -
|-
| <5> := Step position information M_ST_NA_1 || -
|-
| <6> := Step position information with time tag M_ST_TA_1 || -
|-
| <9> := Measured value, normalised value M_ME_NA_1 || -
|-
| <10> := Measured value, normalised value with time tag M_ME_TA_1 || -
|-
| <11> := Measured value, scaled value M_ME_NB_1 || -
|-
| <12> := Measured value, scaled value with time tag M_ME_TB_1 || -
|-
| <13> := Measured value, short floating point value M_ME_NC_1 || -
|-
| <14> := Measured value, short floating point value with time tag M_ME_TC_1 || -
|-
| <30> := Single point information with full time M_SP_TB_1 || -
|-
| <31> := Double point information with full time M_DP_TB_1 || -
|-
| <32> := Step position information with full time M_ST_TB_1 || -
|-
| <34> := Measured value, normalised value with full time M_ME_TD_1 || -
|-
| <35> := Measured value, scaled value with full time M_ME_TE_1 || -
|-
| <36> := Measured value, short floating point value with full time M_ME_TF_1 || -
|-
! Process information in control direction
|-
| <45> := Single command C_SC_NA_1 || -
|-
| <46> := Double command C_DC_NA_1 || -
|-
| <47> := Regulating step command C_RC_NA_1 || -
|-
| <58> := Single command with time tag CP56Time 2a C_SC_TA_1 || -
|-
|  <59> := Double command with time tag CP56Time 2a C_DC_TA_1 || -
|-
|  <60> := Regulating step command with time tag CP56Time 2a C_RC_TA_1 || -
|-
! System information in monitor direction
|-
| <70> := End of initialisation  M_EI_NA_1 || -
|-
! System information in control direction
|-
| <100> := Interrogation command C_IC_NA_1 || -
|-
| <102> := Read command C_RD_NA_1 || -
|-
| <103> := Clock synchronisation command C_CS_NA_1 || -
|-
| <105> := Reset process command C_RP_NC_1 || -
|-
| <106> := Delay acquisition command C_CD_NA_1 || -
|-
! File Transfer
|-
| <120> := File ready F_FR_NA_1 || -
|-
| <121> := Section ready F_SR_NA_1 || -
|-
| <122> := Call directory, select file, call file, call section F_SC_NA_1 || -
|-
| <123> := Last section, last segment F_LS_NA_1 || -
|-
| <124> := Ack file, ack section F_AF_NA_1 || -
|-
| <125> := Segment F_SG_NA_1 || -
|-
| <126> := Directory F_DR_TA_1 || -
|-
! BASIC APPLICATION FUNCTIONS
|-
! Station Initialisation
|-
| Station initialisation for unbalanced systems || -
|-
| Remote initialisation || -
|-
! Data acquisition by polling
|-
| first procedure: “request user data class 1”. || -
|-
| second procedure: “request user data class 2”. || -
|-
! Read procedure
|-
| for Unbalanced systems C_RD_DATA || -
|-
! Cyclic data transmission
|-
| cyclic data transmission || -
|-
! Acquisition of events (for unbalanced systems)
|-
| case 1: spontaneous data is NOT available || -
|-
| case 2: spontaneous data is available || -
|-
! General Interrogation
|-
| Interrogation procedure for unbalanced systems || -
|-
| Interrogation procedure for events arrive between interrogation responses || -
|-
| Global || -
|-
| group 1 || -
|-
| group 2 || -
|-
! Clock synchronisation
|-
| Clock synchronisation for unbalanced systems || -
|-
! Command transmission
|-
| Command procedure for unbalanced systems || -
|-
| Direct single command transmission || -
|-
| Direct double command transmission || -
|-
| Direct regulation command transmission || -
|-
| Select and execute single command || -
|-
| Select and execute double command || -
|-
| Select and execute regulation command || -
|-
| ACTTERM is used || -
|-
| No additional definition || -
|-
| Short pulse duration (duration determined by a system parameter in the outstation) || -
|-
| Long pulse duration (duration determined by a system parameter in the outstation) || -
|-
| Persistent output || -
|-
! File transfer
|-
| File transfer in monitor direction || -
|-
| File transfer in control direction || -
|-
! Acquisition of transmission delay
|-
| Acquisition transmission delay || -
|}

Latest revision as of 11:18, 23 October 2013

Retrieved from "https://phobos.martem.ee/w/index.php?title=GW6e_Conformace_Test&oldid=1453"