Telem-GW-GPIO: Difference between revisions

From Phobos Wiki
Jump to navigation Jump to search
No edit summary
No edit summary
 
(30 intermediate revisions by the same user not shown)
Line 2: Line 2:
{| class="wikitable"
{| class="wikitable"
|-
|-
! Product !! CPU !! revision || reset setup || PWRFAIL <ref name="pwrfail">Shows if external power is available, used to detect power failure</ref> || USB host <ref name="usb_host_attached">USB Host attached to client port</ref> || colspan=3|  DI <ref name="gw6baseDI">Telem-GW6 base</ref> || colspan=3| HW revision <ref name="hw_rev">For reading hardware revision</ref> || ALERT LED || RUN LED || RS485 speed || RST/PWR PERIF <ref name="rst_perif">reset peripherial devices</ref> || PWRMON <ref name="PWRMON">GPRS power monitor</ref> || GPRS on/off <ref name="gprs_power">ON/OFF (GPRS modem)</ref> || GPRS reset <ref name="gprs_reset">GPRS modem reset</ref> || EN_USB_PWR<ref name="EN_5V_1">modem usb power</ref> || EN_3.3V || EN_PWR <ref name="EN_PWR">enable power to other devices</ref> || SD socket WP || Timesync <ref name="timesync">not used on the proto pcb</ref> || RPWRFAIL <ref name="RPWRFAIL">reserv power fail (not used on the proto pcb)</ref> || HW type <ref name="hwtype">Modem or data concentrator mode</ref> || RTC-PWR
! Product !! CPU !! revision || reset setup || PWRFAIL <ref name="pwrfail">Shows if external power is available, used to detect power failure</ref> || USB host <ref name="usb_host_attached">USB Host attached to client port</ref> || colspan=3|  DI <ref name="gw6baseDI">Telem-GW6 base</ref> || colspan=3| HW revision <ref name="hw_rev">For reading hardware revision</ref> || ALERT LED || RUN LED || RS485 speed || RST/PWR PERIF <ref name="rst_perif">reset peripherial devices</ref> || PWRMON <ref name="PWRMON">GPRS power monitor</ref> || GPRS on/off <ref name="gprs_power">ON/OFF (GPRS modem)</ref> || GPRS reset <ref name="gprs_reset">GPRS modem reset</ref> || EN_USB_PWR<ref name="EN_5V_1">modem usb power</ref> || EN_3.3V/EXEC || EN_PWR <ref name="EN_PWR">enable power to other devices</ref> || SD socket WP || Timesync <ref name="timesync">not used on the proto pcb</ref> || RPWRFAIL <ref name="RPWRFAIL">reserv power fail (not used on the proto pcb)</ref> || HW type <ref name="hwtype">Modem or data concentrator mode</ref> || OPT/RTC-PWR
|-
|-
| direction || - || - || IN || IN || IN || colspan=3| IN || colspan=3| IN || OUT || OUT || OUT || OUT || IN || OUT || OUT || OUT || OUT || OUT || IN || IN || IN || IN
| direction || - || - || IN || IN || IN || colspan=3| IN || colspan=3| IN || OUT || OUT || OUT || OUT || IN || OUT || OUT || OUT || OUT || OUT || IN || IN || IN || IN
Line 16: Line 16:
| Telem-GW6 || iMX25/51 || rev.5 || GPIO0 || GPIO1 || - || - || - || - || GPIO3 || GPIO5 || GPIO10 || GPIO2 || GPIO4 || - || GPIO8 || - || - || - || - || - || GPIO11 || GPIO6 || GPIO7 || GPIO9 || LD22
| Telem-GW6 || iMX25/51 || rev.5 || GPIO0 || GPIO1 || - || - || - || - || GPIO3 || GPIO5 || GPIO10 || GPIO2 || GPIO4 || - || GPIO8 || - || - || - || - || - || GPIO11 || GPIO6 || GPIO7 || GPIO9 || LD22
|-
|-
| Telem-GW6 || iMX25/51/53 || rev.7 || LD16 (pin134) || LD17 (pin135) || - || - || - || - || GPIO3 (pin151) || GPIO5 (pin153) || LD8 (pin125) || GPIO2 (pin150) || GPIO4 (pin152) || - || GPIO8 (pin156) || - || - || - || - || - || LD23 (pin141) || GPIO6 (pin154) || GPIO9 (pin157) || - || LD22 (pin140)
| Telem-GW6 || iMX25/51 || rev.7 || LD16 (pin134) || LD17 (pin135) || - || - || - || - || GPIO3 (pin151) || GPIO5 (pin153) || LD8 (pin125) || GPIO2 (pin150) || GPIO4 (pin152) || - || GPIO8 (pin156) || - || - || - || - || - || LD23 (pin141) || GPIO6 (pin154) || GPIO9 (pin157) || - || LD22 (pin140)
|-
|-
| Telem-GWM || iMX.25 || rev.1 || GPIO0 || GPIO1 || - || - || - || - || GPIO3 || GPIO5 || - || GPIO2 || GPIO4 || - || GPIO8 || GPIO10 || GPIO9 || GPIO7 || GPIO6 || GPIO11 || - || - || - || - || LD22
| Telem-GW6e || iMX53 || rev.8+ || #EMICS1 (pin162) || #EMICS0 (pin161) || - || - || - || - || #EMIEB0 (pin165) || #EMIWAIT (pin164) || - || GPIO2 (pin150) || GPIO4 (pin152) || - || SSI2_INT (pin89) || - || - || - || - || - ||GPIO3 (pin151) || GPIO6 (pin154) || #EMIEB1 (pin166) || - || #EMICS4 (pin163)
|-
|-
| Telem-GWM || iMX.25/53 || rev.2/3 || LD16 (pin134) || LD17 (pin135) || - || - || - || - || GPIO3 (pin151) || - || - || GPIO2 (pin150) || GPIO4 (pin152) || - || GPIO8 (pin156) || GPIO5 (pin153) || GPIO9 (pin157) || GPIO7 (pin155) || GPIO6 (pin154) || - || LD23 (pin141) || - || - || - || -
| Telem-GWM || iMX25 || rev.1 || GPIO0 || GPIO1 || - || - || - || - || GPIO3 || GPIO5 || - || GPIO2 || GPIO4 || - || GPIO8 || GPIO10 || GPIO9 || GPIO7 || GPIO6 || GPIO11 || - || - || - || - || LD22
|-
|-
| Telem-GWM-A || iMX.25/53 || rev.4 || LD16 (pin134) || LD17 (pin135) || - || - || - || - || - || - || - || GPIO2 (pin150) || GPIO4 (pin152) || - || GPIO8 (pin156) || GPIO5 (pin153) || GPIO9 (pin157) || GPIO7 (pin155) || GPIO6 (pin154) || - || LD23 (pin141) || - || - || - || GPIO3 (pin151)
| Telem-GWM || iMX25 || rev.2/3 || LD16 (pin134) || LD17 (pin135) || - || - || - || - || GPIO3 (pin151) || - || - || GPIO2 (pin150) || GPIO4 (pin152) || - || GPIO8 (pin156) || GPIO5 (pin153) || GPIO9 (pin157) || GPIO7 (pin155) || GPIO6 (pin154) || - || LD23 (pin141) || - || - || - || -
|-
| Telem-GWM-A || iMX53 || rev.1 || #EMICS1 (pin162) || #EMICS0 (pin161) || - || - || - || - || #EMIEB0 (pin165) || #EMIWAIT (pin164) || - || GPIO2 (pin150) || GPIO4 (pin152) || - || I2C_OUT0 || #EMIEB1 (pin166) || SSI2_INT (89) || SSI1_INT (83) || I2C_OUT2 || I2C_OUT1 || GPIO3 (pin151) || - || - || - ||  #EMICS4 (pin163)
|
|-
| Telem-GWM53-O || iMX53 || rev.4/5/6 || I2C_IN0 || I2C_IN7 || - || - || - || - || I2C_IN2 || I2C_IN3 || I2C_IN4 || GPIO2 (pin150) || GPIO4 (pin152) || - || I2C_OUT0 || I2C_IN1 || I2C_OUT1 || I2C_OUT2 || I2C_OUT4 || I2C_OUT3 || I2C_OUT6 || - || #EMIEB1 (pin166) || - ||  I2C_IN6 || I2C__OUT5
|}
|}
<references/>
<references/>

Latest revision as of 13:37, 15 September 2014

GPIO list

Product CPU revision reset setup PWRFAIL [1] USB host [2] DI [3] HW revision [4] ALERT LED RUN LED RS485 speed RST/PWR PERIF [5] PWRMON [6] GPRS on/off [7] GPRS reset [8] EN_USB_PWR[9] EN_3.3V/EXEC EN_PWR [10] SD socket WP Timesync [11] RPWRFAIL [12] HW type [13] OPT/RTC-PWR
direction - - IN IN IN IN IN OUT OUT OUT OUT IN OUT OUT OUT OUT OUT IN IN IN IN
--- bit 0 bit 1 bit 2 bit 0 bit 1 bit 2
Telem-GW6 PXA270M rev.2 GPIO25 - GPIO41 GPIO12 GPIO14 GPIO106 GPIO54 GPIO55 GPIO85 GPIO23 GPIO26 - GPIO24 - - - - - - - - - - GPIO1
Telem-GW6 PXA270M rev.3/4 GPIO25 GPIO1 GPIO41 GPIO12 GPIO14 GPIO106 GPIO54 GPIO55 GPIO85 GPIO23 GPIO26 - GPIO24 - - - - - - - - -
Telem-GW6 PXA270M rev.4a GPIO25 GPIO1 GPIO41 GPIO12 GPIO14 GPIO106 GPIO54 GPIO55 GPIO85 GPIO23 GPIO26 GPIO17 GPIO24 - - - - - - - - -
Telem-GW6 iMX25/51 rev.5 GPIO0 GPIO1 - - - - GPIO3 GPIO5 GPIO10 GPIO2 GPIO4 - GPIO8 - - - - - GPIO11 GPIO6 GPIO7 GPIO9 LD22
Telem-GW6 iMX25/51 rev.7 LD16 (pin134) LD17 (pin135) - - - - GPIO3 (pin151) GPIO5 (pin153) LD8 (pin125) GPIO2 (pin150) GPIO4 (pin152) - GPIO8 (pin156) - - - - - LD23 (pin141) GPIO6 (pin154) GPIO9 (pin157) - LD22 (pin140)
Telem-GW6e iMX53 rev.8+ #EMICS1 (pin162) #EMICS0 (pin161) - - - - #EMIEB0 (pin165) #EMIWAIT (pin164) - GPIO2 (pin150) GPIO4 (pin152) - SSI2_INT (pin89) - - - - - GPIO3 (pin151) GPIO6 (pin154) #EMIEB1 (pin166) - #EMICS4 (pin163)
Telem-GWM iMX25 rev.1 GPIO0 GPIO1 - - - - GPIO3 GPIO5 - GPIO2 GPIO4 - GPIO8 GPIO10 GPIO9 GPIO7 GPIO6 GPIO11 - - - - LD22
Telem-GWM iMX25 rev.2/3 LD16 (pin134) LD17 (pin135) - - - - GPIO3 (pin151) - - GPIO2 (pin150) GPIO4 (pin152) - GPIO8 (pin156) GPIO5 (pin153) GPIO9 (pin157) GPIO7 (pin155) GPIO6 (pin154) - LD23 (pin141) - - - -
Telem-GWM-A iMX53 rev.1 #EMICS1 (pin162) #EMICS0 (pin161) - - - - #EMIEB0 (pin165) #EMIWAIT (pin164) - GPIO2 (pin150) GPIO4 (pin152) - I2C_OUT0 #EMIEB1 (pin166) SSI2_INT (89) SSI1_INT (83) I2C_OUT2 I2C_OUT1 GPIO3 (pin151) - - - #EMICS4 (pin163)
Telem-GWM53-O iMX53 rev.4/5/6 I2C_IN0 I2C_IN7 - - - - I2C_IN2 I2C_IN3 I2C_IN4 GPIO2 (pin150) GPIO4 (pin152) - I2C_OUT0 I2C_IN1 I2C_OUT1 I2C_OUT2 I2C_OUT4 I2C_OUT3 I2C_OUT6 - #EMIEB1 (pin166) - I2C_IN6 I2C__OUT5
  1. ↑ Shows if external power is available, used to detect power failure
  2. ↑ USB Host attached to client port
  3. ↑ Telem-GW6 base
  4. ↑ For reading hardware revision
  5. ↑ reset peripherial devices
  6. ↑ GPRS power monitor
  7. ↑ ON/OFF (GPRS modem)
  8. ↑ GPRS modem reset
  9. ↑ modem usb power
  10. ↑ enable power to other devices
  11. ↑ not used on the proto pcb
  12. ↑ reserv power fail (not used on the proto pcb)
  13. ↑ Modem or data concentrator mode
Retrieved from "https://phobos.martem.ee/w/index.php?title=Telem-GW-GPIO&oldid=1582"