GW6e Conformace Test

GW6e Conformance Test

NAME	STATUS
Implemented transmission system
Unbalanced system	OK
Network configuration
Point-to-point	OK
Multidrop	OK
PHYSICAL LAYER
Transmission speed
1200 bit/s	FCB Invalid
2400 bit/s	-
4800 bit/s	-
9600 bit/s	OK
19200 bit/s	-
LINK LAYER
Link transmission procedure
Unbalanced transmission	-
Address field of the link
One octet	-
Two octets	-
Frame length
Unstructured	-
Common address of ASDU
One octet	-
Information object address
Two octets	-
Three octets	-
Unstructured	-
Cause of transmission
One octet	-
SELECTION OF STANDARD ASDUS
Process information in monitor direction
<1> := Single-point information M_SP_NA_1	-
<2> := Single-point information with time tag M_SP_TA_1	-
<3> := Double-point information M_DP_NA_1	-
<4> := Double-point information with time tag M_DP_TA_1	-
<5> := Step position information M_ST_NA_1	-
<6> := Step position information with time tag M_ST_TA_1	-
<9> := Measured value, normalised value M_ME_NA_1	-
<10> := Measured value, normalised value with time tag M_ME_TA_1	-
<11> := Measured value, scaled value M_ME_NB_1	-
<12> := Measured value, scaled value with time tag M_ME_TB_1	-
<13> := Measured value, short floating point value M_ME_NC_1	-
<14> := Measured value, short floating point value with time tag M_ME_TC_1	-
<30> := Single point information with full time M_SP_TB_1	-
<31> := Double point information with full time M_DP_TB_1	-
<32> := Step position information with full time M_ST_TB_1	-
<34> := Measured value, normalised value with full time M_ME_TD_1	-
<35> := Measured value, scaled value with full time M_ME_TE_1	-
<36> := Measured value, short floating point value with full time M_ME_TF_1	-
Process information in control direction
<45> := Single command C_SC_NA_1	-
<46> := Double command C_DC_NA_1	-
<47> := Regulating step command C_RC_NA_1	-
<58> := Single command with time tag CP56Time 2a C_SC_TA_1	-
<59> := Double command with time tag CP56Time 2a C_DC_TA_1	-
<60> := Regulating step command with time tag CP56Time 2a C_RC_TA_1	-
System information in monitor direction
<70> := End of initialisation M_EI_NA_1	-
System information in control direction
<100> := Interrogation command C_IC_NA_1	-
<102> := Read command C_RD_NA_1	-
<103> := Clock synchronisation command C_CS_NA_1	-
<105> := Reset process command C_RP_NC_1	-
<106> := Delay acquisition command C_CD_NA_1	-
File Transfer
<120> := File ready F_FR_NA_1	-
<121> := Section ready F_SR_NA_1	-
<122> := Call directory, select file, call file, call section F_SC_NA_1	-
<123> := Last section, last segment F_LS_NA_1	-
<124> := Ack file, ack section F_AF_NA_1	-
<125> := Segment F_SG_NA_1	-
<126> := Directory F_DR_TA_1	-
BASIC APPLICATION FUNCTIONS
Station Initialisation
Station initialisation for unbalanced systems	-
Remote initialisation	-
Data acquisition by polling
first procedure: “request user data class 1”.	-
second procedure: “request user data class 2”.	-
Read procedure
for Unbalanced systems C_RD_DATA	-
Cyclic data transmission
cyclic data transmission	-
Acquisition of events (for unbalanced systems)
case 1: spontaneous data is NOT available	-
case 2: spontaneous data is available	-
General Interrogation
Interrogation procedure for unbalanced systems	-
Interrogation procedure for events arrive between interrogation responses	-
Global	-
group 1	-
group 2	-
Clock synchronisation
Clock synchronisation for unbalanced systems	-
Command transmission
Command procedure for unbalanced systems	-
Direct single command transmission	-
Direct double command transmission	-
Direct regulation command transmission	-
Select and execute single command	-
Select and execute double command	-
Select and execute regulation command	-
ACTTERM is used	-
No additional definition	-
Short pulse duration (duration determined by a system parameter in the outstation)	-
Long pulse duration (duration determined by a system parameter in the outstation)	-
Persistent output	-
File transfer
File transfer in monitor direction	-
File transfer in control direction	-
Acquisition of transmission delay
Acquisition transmission delay	-