Wiresharking IEC: Difference between revisions
No edit summary |
No edit summary |
||
| Line 18: | Line 18: | ||
<pre>104apci.utype == 0x10 Activation | <pre>104apci.utype == 0x10 Activation | ||
104apci.utype == 0x20 Confirmation</pre> | 104apci.utype == 0x20 Confirmation</pre> | ||
Show S-Type messages | |||
<pre>104apci.type == 0x01</pre> | |||
Show General Interrogation commands | Show General Interrogation commands | ||
<pre>104asdu.typeid == 100 Global, Group1...Group16 | <pre>104asdu.typeid == 100 Global, Group1...Group16 | ||
| Line 27: | Line 29: | ||
Show clock syncronisation commands | Show clock syncronisation commands | ||
<pre>104asdu.typeid == 103</pre> | <pre>104asdu.typeid == 103</pre> | ||
==IEC61850== | ==IEC61850== | ||
Revision as of 17:51, 4 March 2015
Some basic filters for analysing wireshark logs in case of IEC protocols
IEC60870-5-104
Dispaly packages with TCP length>0 (no ack messages)
tcp.len>0
Display packets involving 192.168.0.111
ip.addr==192.168.0.111
Display packets involving TCP port 2404
tcp.port==2404
Filter information object address 401
104asdu.ioa == 401
Show spontaneous events (COT==3)
104asdu.causetx == 3
Show packets containing command messages (COT 6, 7, 10)
104asdu.causetx == 6 Activation 104asdu.causetx == 7 Confirmation 104asdu.causetx == 10 Termination
Show packets containing Testframe messages
104apci.utype == 0x10 Activation 104apci.utype == 0x20 Confirmation
Show S-Type messages
104apci.type == 0x01
Show General Interrogation commands
104asdu.typeid == 100 Global, Group1...Group16
104asdu.qoi == 20 Global
104asdu.qoi == 21 Group1
104asdu.qoi == 35 Group15
Do not use Group 16 with Martem devices. This is reserved.
Show clock syncronisation commands
104asdu.typeid == 103
IEC61850
MMS: Manufacturing Message Specification GOOSE: Generic Object Oriented Substation Events
Filter IEC61850 packets
mms
Display packets involving TCP port 102
tcp.port==102
Display messages containing domain ID "VampRelay"
mms.domainId == "VampRelay"
Display messages containing item ID "VI1GGIO137$CO$SPCSO$Oper" (VI1 control command)
mms.itemId == "VI1GGIO137$CO$SPCSO$Oper"
Display messages containing control commands (Service request 5 = write)
mms.confirmedServiceRequest == 5
Dispaly packets containing message "success" (response to command message)
mms.Write_Response_item == 1