GwLin Changelog: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
Line 3: | Line 3: | ||
*Fix possible event loss when lots of changes arrive for one input. | *Fix possible event loss when lots of changes arrive for one input. | ||
*GPRS-modem protocol: if connection to internet is lost, all '''TCP client connections''' are closed | *GPRS-modem protocol: if connection to internet is lost, all '''TCP client connections''' are closed | ||
*IEC104: force '''long-time format''' | |||
==GW6-1198== | ==GW6-1198== | ||
*IEC101/103 Unbalanced Master: add feature polling delay | *IEC101/103 Unbalanced Master: add feature ''polling delay'' | ||
*When sending a '''control operation''' over IEC103 channel with many devices. Speed up receiving of control response. | *When sending a '''control operation''' over IEC103 channel with many devices. Speed up receiving of control response. | ||
==GW6-1196== | ==GW6-1196== |
Revision as of 18:43, 20 February 2012
GW6-1200
- Firmware version readable through internal WebServer
- Fix possible event loss when lots of changes arrive for one input.
- GPRS-modem protocol: if connection to internet is lost, all TCP client connections are closed
- IEC104: force long-time format
GW6-1198
- IEC101/103 Unbalanced Master: add feature polling delay
- When sending a control operation over IEC103 channel with many devices. Speed up receiving of control response.
GW6-1196
- Connection loss with RTC-board does not result in watchdog reset.
- Symptoms: device will reset after 20 seconds of running.
- Device will write system boot count and application start count to console.log. Latest values can be found in /var/local/telem/stats
RTA-A-1192
- RTA-A: possible to define DO object to clear annunciator LED 's
- Modbus Master: Fix receiving of negative 16bit normalized values.
GW6-1190
- Added new update pack type app-only.
- Note: This update pack type should only be used on device with SW version 1190 or later.
- This update will not overwrite system files - less chance for bricking if something goes wrong (accidental power loss or reset).
- Generate /etc/network/interfaces file once after receiving new setup.
- New protocol type IEC ^ Setup
- Only reading and writing of device setup is allowed on this Port.
- Allows faster booting of device with a lot of unused Up-channel ports.