GwLin Changelog

Applies to all new devices, that is TELEM-RTA-A, TELEM-GW6, TELEM-GWM

GWx-Future

• Iec-101 to Iec-104 retranslation
• Setup version 4, configuration of VLAN's, VPN and other Linux parameters with gws.exe. Originaly made for TELEM-GWM.
• Custom web page
• Protocols: transparent
• VPN: IPsec, L2TP
• AO(analog output) supported protocols: IEC-101, IEC-104 and Modbus Master
• Time Invalid Flag
• Added more Modbus floating point types
• Static routes
• 2 byte cause of transmission for IEC-101ub and IEC-101b
• 2 byte link address for IEC-101ub and IEC101b
• class1 and class2 data in IEC101ub

• [22.03.2016]

1-wire segfault on bing temp. change fix

• [11.03.2016]

IEC-104 object type priorities fix

• [23.02.2016]

webserver v2 IE11 not working fix

• [11.02.2016]

physical interface checker script implementation

• [10.02.2016]

NEW_DATABASE formulas numerous fixes

logging optimizations using fastformat. VMX25 up to 10x faster

• [26.01.2016]

GWS 'Get logs' acquires n+1 more rotating logs

• [05.11.2015]

AI scaling rewrite (COMPATIBILITY BREAK)

• [14.10.2015]

IEC-101 DO_FN type implementation

• [07.09.2015]

GWM IO-board + 101-104 conversion not working fix

• [25.08.2015]

IEC-61850 mem-leak/consumption fixes

• [08.06.2015]

application segmentation fault fix

• [27.04.2015]

DI fallback bug fix

• [23.04.2015]

DI object inversion bug fix

• [20.04.2015]

No flags not working fix

• [24.03.2015]

Periodical GI implementation for all protocols (every 5th minute of hour)

• [16.03.2015]

Telem Master protocol implementation

• [29.01.2015]

IEC-10x ASDU transfer implementation

• [30.10.2014]

IEC-101B serial communication improvements

• 2014.01.13-next-01-2a5df30

added uINT16 (unsigned 16bit integer) in modbus protocol. (also update gws)

• 2014.01.09-next-01-2fae2d9

fix IEC104 bug in GW6

• 2014.01.07-next-01-8180155

fix fallback (GW6e and GWM), "NONE" protocol, device "in use"=no, FP-to-normalised conversion, deadband issues, IEC104 bug in GW6e. (also update gws)

• 2013.11.18-next-04

fix IEC-104 bug (mark data as NT if connection to IEC-104 slave is lost and parameter "failed query count for disabling contr." > 1)

• 2013.11.12-next01

fix AO feedback bug in GW6 and RTA-A

• 2013.11.04-next

time invalid flag for GW6 and RTA-A (also requires DSP/RTC software update!)

• 2013.10.24-next

IEC101-to-IEC104 short time to long time conversion

• 2013.09.16-next07

configurable COT=2 Bytes for IEC101b

• 2013.09.09-next01

configurable COT=2 Bytes for IEC101ub

• 2013.07.12-next02

write modem status to /var/log/modem.st

GW6-1206

• Timezones for ports and system.

Userland

• dnsmasq
• iperf

Kernel

• iptables: Support for -m limit. For instance:

 /usr/sbin/iptables -t filter -A INPUT -p tcp --dport 2404 --sport 1024:65535 -m state --state NEW -m limit --limit 25/minute --limit-burst 100 -j ACCEPT

• tc: Basic support. For instance:

/sbin/tc qdisc del dev eth0 root    2> /dev/null > /dev/null
/sbin/tc qdisc del dev eth0 ingress 2> /dev/null > /dev/null

/sbin/tc qdisc add dev eth0 handle ffff: ingress
/sbin/tc filter add dev eth0 parent ffff: protocol ip prio 1 u32 match ip src 0.0.0.0/0 police rate 512kbit burst 1m drop flowid :1

/sbin/tc qdisc add dev eth0 root handle 1: cbq avpkt 1000 bandwidth 20mbit 
/sbin/tc class add dev eth0 parent 1: classid 1:1 cbq rate 512kbit allot 1500 prio 1 bounded isolated 
/sbin/tc class add dev eth0 parent 1: classid 1:2 cbq rate 512kbit allot 1500 prio 2 bounded isolated
/sbin/tc class add dev eth0 parent 1: classid 1:3 cbq rate 512kbit allot 1500 prio 3 bounded isolated
/sbin/tc filter add dev eth0 parent 1: protocol ip prio 16 u32 match ip protocol 1 0xff flowid 1:1
/sbin/tc filter add dev eth0 parent 1: protocol ip prio 1 u32 match ip sport 80 0xffff flowid 1:2
/sbin/tc filter add dev eth0 parent 1: protocol ip prio 1 u32 match ip sport 22 0xffff flowid 1:3

GW6-1204

• IEC104: Respond to message sent to broadcast ASDU (0xFFFF)
• IEC-62056: mask incoming data with 0x7F (ASCII protocol)
• Serial ports: Suppress echo
• WebPage: Long awaited by all interenet browsers the favicon.ico

GW6-1202

• IEC104: Fix possible event loss on ethernet cable removal.
• Formula: Do not generate control event, on first successful calculation.

GW6-1200

• Firmware version readable through internal WebServer
• Fix possible event loss when lots of changes arrive for one input.
• GPRS-modem protocol: if connection to internet is lost, all TCP client connections are closed
• IEC104: force long-time format

GW6-1198

• IEC101/103 Unbalanced Master: add feature polling delay
• When sending a control operation over IEC103 channel with many devices. Speed up receiving of control response.

GW6-1196

• Connection loss with RTC-board does not result in watchdog reset.
  • Symptoms: device will reset after 20 seconds of running.
• Device will write system boot count and application start count to console.log. Latest values can be found in /var/local/telem/stats

RTA-A-1192

• RTA-A: possible to define DO object to clear annunciator LED 's
• Modbus Master: Fix receiving of negative 16bit normalized values.

GW6-1190

• Added new update pack type app-only.
  • Note: This update pack type should only be used on device with SW version 1190 or later.
  • This update will not overwrite system files - less chance for bricking if something goes wrong (accidental power loss or reset).
• Generate /etc/network/interfaces file once after receiving new setup.
• New protocol type IEC ^ Setup
  • Only reading and writing of device setup is allowed on this Port.
  • Allows faster booting of device with a lot of unused Up-channel ports.