Flashing PXA27M bootloader

System set up

• tftp server
• konsole/ssherminator - allows you to open as many terminals in one window as you need
  • During this procedure you're gonna need at least three
• Media:Libftd2xx0.4.13.tar.gz
• Media:Openocd 1.0.1383 i386.tar.gz
• Media:Voipac-pxa27x xloader.tar.gz
• Media:Voipac-pxa27x-u-boot nostart.tar
• Media:Voipac-pxa27x u-boot original.tar

Linux kernel

You need to enable usbfs in your kernel.

Enable CONFIG_USB_DEVICEFS option in kernel options

how-to-customize-your-ubuntu-kernel

Install OpenOCD

1. Copy libftd2xx.so to your /usr/lib folder
2. Create symlinks for the libftd2xx by using the following commands:
   • cd /usr/lib
   • ln -s libftd2xx.so.0.4.13 libftd2xx.so.0.4
   • ln -s libftd2xx.so.0.4.13 libftd2xx.so.0
   • ln -s libftd2xx.so.0.4.13 libftd2xx.so
3. tar xzfv openocd_1.0.1383_i386.tar.gz
4. dpkg -i openocd_1.0.1383_i386.deb
   • When trying to install this on a 64bit system you need to --force-architecture or you'll get an error.

Using OpenOCD

1. Power up target board and connect JTAG
2. Start the first terminal and write
   • openocd -f vpac270.cfg
     • Error: unable to open ftdi device: 18
       • OpenOCD needs usbfs
       • mount -t usbfs none /proc/bus/usb
     • Error: unable to open ftdi device: 2
       • You need root privileges
       • log in as root or
       • sudo openocd -f vpac270.cfg
3. Start second terminal, use telnet to connect to OpenOCD daemon.
   1. telnet localhost 4444
   2. reset halt
   3. load_image /tftpboot/u-boot_noboot.bin 0x5c010000
   4. resume 0x5c010000
4. Start third terminal
   • minicom
     • Use settings 38400 8N1
   • set ipaddr 10.0.0.22;set serverip 10.0.0.16;erase 1:0-2;tftp x-load.bin;cp.b a1000000 0 400;tftp u-boot.bin;cp.b a1000000 800 $(filesize);reset

Reference material

• Installing OpenOCD
• How to customize your Ubuntu kernel