TCP/IP Settings

From Phobos Wiki
Revision as of 09:52, 9 March 2015 by Roland (talk | contribs) (Uus lehekülg: 'Used for determine TCP/IP communication paramaters and firewall functionality in Telem device. ===== Global tab ===== In Global tab following parameters can be set: WAN interface...')
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Used for determine TCP/IP communication paramaters and firewall functionality in Telem device.

Global tab

In Global tab following parameters can be set: WAN interface: Choose which interface is used for WAN connection Hostname: Name of the device. Default gateway: Default gateway of the device DNS: Set DNS parameters. Firewall: Set firewall parameters if necessary. DHCP server: Define max lease count for DHCP server.

Eth0...EthX tab Ethernet tabs have similar structure, each tab correspond to physical ethernet port on Telem device. There are different number of ethernet ports with different hardware. Each port can be configured with multi IP address and VLAN interfaces TCP/IP settings: define primary IP settings for current port. Ports using this interface are shown in the brackets. If split access in the Global tab is chosen then additional gateway to each interface can be chosen. DHCP Server: enable DHCP server for current interface, define address range for current DHCP server. Add additional IP: up to 4 additional IP addresses to each interface Add VLAN: up to 16 tagged VLAN-s for each interface. 

Br0/br1 tab

Combine two ethernet ports to work as a bridge. Bridge: enable bridge, choose interfaces to use. STP: enable STP protocol TCP/IP settings: Define primary IP settings for current port. DHCP Server: enable DHCP server for current interface, define address range for current DHCP server. Add additional IP: up to 4 additional IP addresses to interface Add VLAN: up to 16 tagged VLAN-s for interface.

Retrieved from "https://phobos.martem.ee/w/index.php?title=TCP/IP_Settings&oldid=1774"