GW6e Conformace Test

GW6e Conformace Test

Implemented transmission system
Unbalanced system	-
Network configuration
Point-to-point	-
Multidrop	-
PHYSICAL LAYER
Transmission speed
1200 bit/s	-
2400 bit/s	-
4800 bit/s	-
9600 bit/s	-
19200 bit/s	-
LINK LAYER
Link transmission procedure
Unbalanced transmission	-
Address field of the link
One octet	-
Two octets	-
Frame length
Unstructured	-
Common address of ASDU
One octet	-
Information object address
Two octets	-
Three octets	-
Unstructured	-
Cause of transmission
One octet	-
SELECTION OF STANDARD ASDUS
Process information in monitor direction
<1> := Single-point information	-
<2> := Single-point information with time tag	-
<3> := Double-point information	-
<4> := Double-point information with time tag	-
<5> := Step position information	-
<6> := Step position information with time tag	-
<9> := Measured value, normalised value	-
<10> := Measured value, normalised value with time tag	-
<11> := Measured value, scaled value	-
<12> := Measured value, scaled value with time tag	-
<13> := Measured value, short floating point value	-
<14> := Measured value, short floating point value with time tag	-
<30> := Single point information with full time	-
<31> := Double point information with full time	-
<32> := Step position information with full time	-
<34> := Measured value, normalised value with full time	-
<35> := Measured value, scaled value with full time	-
<36> := Measured value, short floating point value with full time	-
Process information in control direction
<45> := Single command	-
<46> := Double command	-
<47> := Regulating step command	-
<58> := Single command with time tag CP56Time 2a	-
<59> := Double command with time tag CP56Time 2a	-
<60> := Regulating step command with time tag CP56Time 2a	-
System information in monitor direction
<70> := End of initialisation	-
System information in control direction
<100> := Interrogation command	-
<102> := Read command	-
<103> := Clock synchronisation command	-
<105> := Reset process command	-
<106> := Delay acquisition command	-
File Transfer
<120> := File ready	-
<121> := Section ready	-
<122> := Call directory, select file, call file, call section	-
<123> := Last section, last segment	-
<124> := Ack file, ack section	-
<125> := Segment	-
<126> := Directory	-