GwLin Changelog
		
		
		
		Jump to navigation
		Jump to search
		
Applies to all new devices, that is TELEM-RTA-A, TELEM-GW6, TELEM-GWM
GWx-Future
- Iec-101 to Iec-104 retranslation
 - Setup version 4, configuration of VLAN's, VPN and other Linux parameters with gws.exe. Originaly made for TELEM-GWM.
 - Custom web page
 - Protocols: transparent
 - VPN: IPsec, L2TP
 - AO(analog output) supported protocols: IEC-101, IEC-104 and Modbus Master
 - Time Invalid Flag
 - Added more Modbus floating point types
 - Static routes
 - 2 byte cause of transmission for IEC-101ub and IEC-101b
 
- 2013.11.18-next-04
 
- fix IEC-104 bug (mark data as NT if connection to IEC-104 slave is lost)
 
- 2013.11.12-next01
 
- fix AO feedback bug in GW6 and RTA-A
 
- 2013.11.04-next
 
- time invalid flag for GW6 and RTA-A (also requires DSP/RTC software update!)
 
- 2013.10.24-next
 
- IEC101-to-IEC104 short time to long time conversion
 
- 2013.09.16-next07
 
- configurable COT=2 Bytes for IEC101b
 
- 2013.09.09-next01
 
- configurable COT=2 Bytes for IEC101ub
 
- 2013.07.12-next02
 
- write modem status to /var/log/modem.st
 
GW6-1206
- Timezones for ports and system.
 
Userland
- dnsmasq
 - iperf
 
Kernel
- iptables: Support for -m limit. For instance:
 
/usr/sbin/iptables -t filter -A INPUT -p tcp --dport 2404 --sport 1024:65535 -m state --state NEW -m limit --limit 25/minute --limit-burst 100 -j ACCEPT
- tc: Basic support. For instance:
 
/sbin/tc qdisc del dev eth0 root 2> /dev/null > /dev/null /sbin/tc qdisc del dev eth0 ingress 2> /dev/null > /dev/null /sbin/tc qdisc add dev eth0 handle ffff: ingress /sbin/tc filter add dev eth0 parent ffff: protocol ip prio 1 u32 match ip src 0.0.0.0/0 police rate 512kbit burst 1m drop flowid :1 /sbin/tc qdisc add dev eth0 root handle 1: cbq avpkt 1000 bandwidth 20mbit /sbin/tc class add dev eth0 parent 1: classid 1:1 cbq rate 512kbit allot 1500 prio 1 bounded isolated /sbin/tc class add dev eth0 parent 1: classid 1:2 cbq rate 512kbit allot 1500 prio 2 bounded isolated /sbin/tc class add dev eth0 parent 1: classid 1:3 cbq rate 512kbit allot 1500 prio 3 bounded isolated /sbin/tc filter add dev eth0 parent 1: protocol ip prio 16 u32 match ip protocol 1 0xff flowid 1:1 /sbin/tc filter add dev eth0 parent 1: protocol ip prio 1 u32 match ip sport 80 0xffff flowid 1:2 /sbin/tc filter add dev eth0 parent 1: protocol ip prio 1 u32 match ip sport 22 0xffff flowid 1:3
GW6-1204
- IEC104: Respond to message sent to broadcast ASDU (0xFFFF)
 - IEC-62056: mask incoming data with 0x7F (ASCII protocol)
 - Serial ports: Suppress echo
 - WebPage: Long awaited by all interenet browsers the favicon.ico
 
GW6-1202
- IEC104: Fix possible event loss on ethernet cable removal.
 - Formula: Do not generate control event, on first successful calculation.
 
GW6-1200
- Firmware version readable through internal WebServer
 - Fix possible event loss when lots of changes arrive for one input.
 - GPRS-modem protocol: if connection to internet is lost, all TCP client connections are closed
 - IEC104: force long-time format
 
GW6-1198
- IEC101/103 Unbalanced Master: add feature polling delay
 - When sending a control operation over IEC103 channel with many devices. Speed up receiving of control response.
 
GW6-1196
- Connection loss with RTC-board does not result in watchdog reset.
- Symptoms: device will reset after 20 seconds of running.
 
 - Device will write system boot count and application start count to console.log. Latest values can be found in /var/local/telem/stats
 
RTA-A-1192
- RTA-A: possible to define DO object to clear annunciator LED 's
 - Modbus Master: Fix receiving of negative 16bit normalized values.
 
GW6-1190
- Added new update pack type app-only.
- Note: This update pack type should only be used on device with SW version 1190 or later.
 - This update will not overwrite system files - less chance for bricking if something goes wrong (accidental power loss or reset).
 
 - Generate /etc/network/interfaces file once after receiving new setup.
 - New protocol type IEC ^ Setup
- Only reading and writing of device setup is allowed on this Port.
 - Allows faster booting of device with a lot of unused Up-channel ports.