GW6e Conformance Test

From Phobos Wiki
Revision as of 09:03, 5 February 2014 by MarkTomm (talk | contribs)
Jump to navigation Jump to search

GW6e Conformance Test

NAME STATUS
Implemented transmission system
Unbalanced system OK
Network configuration
Point-to-point OK
Multidrop OK
PHYSICAL LAYER
Transmission speed
1200 bit/s OK
2400 bit/s OK
4800 bit/s OK
9600 bit/s OK
19200 bit/s OK
38400 bit/s OK
57600 bit/s OK
115200 bit/s OK
230400 bit/s OK
460800 bit/s OK
500000 bit/s OK
576000 bit/s OK
921600 bit/s OK
LINK LAYER
Link transmission procedure
Unbalanced transmission OK
Address field of the link
One octet OK
Two octets OK
Frame length
Unstructured OK
Common address of ASDU
One octet OK
Two octets OK
Information object address
Two octets OK
Three octets OK
Unstructured -
Cause of transmission
One octet OK
Two octets OK
SELECTION OF STANDARD ASDUS
Process information in monitor direction
<1> := Single-point information M_SP_NA_1 OK
<2> := Single-point information with time tag M_SP_TA_1 OK
<3> := Double-point information M_DP_NA_1 OK
<4> := Double-point information with time tag M_DP_TA_1 OK
<5> := Step position information M_ST_NA_1 OK
<6> := Step position information with time tag M_ST_TA_1 OK
<9> := Measured value, normalised value M_ME_NA_1 OK
<10> := Measured value, normalised value with time tag M_ME_TA_1 OK
<11> := Measured value, scaled value M_ME_NB_1 OK
<12> := Measured value, scaled value with time tag M_ME_TB_1 OK
<13> := Measured value, short floating point value M_ME_NC_1 OK
<14> := Measured value, short floating point value with time tag M_ME_TC_1 OK
<30> := Single point information with full time M_SP_TB_1 OK
<31> := Double point information with full time M_DP_TB_1 OK
<32> := Step position information with full time M_ST_TB_1 OK
<34> := Measured value, normalised value with full time M_ME_TD_1 OK
<35> := Measured value, scaled value with full time M_ME_TE_1 OK
<36> := Measured value, short floating point value with full time M_ME_TF_1 OK
Process information in control direction
<45> := Single command C_SC_NA_1 OK
<46> := Double command C_DC_NA_1 OK
<47> := Regulating step command C_RC_NA_1 X
<48> := Set point command, normalized value C_SE_NA_1 OK
<50> := Set point command, short floating point number C_SE_NC_1 OK
<58> := Single command with time tag CP56Time 2a C_SC_TA_1 X
<59> := Double command with time tag CP56Time 2a C_DC_TA_1 X
<60> := Regulating step command with time tag CP56Time 2a C_RC_TA_1 X
System information in monitor direction
<70> := End of initialisation M_EI_NA_1 OK
System information in control direction
<100> := Interrogation command C_IC_NA_1 OK
<102> := Read command C_RD_NA_1 X
<103> := Clock synchronisation command C_CS_NA_1 OK
<105> := Reset process command C_RP_NC_1 OK
<106> := Delay acquisition command C_CD_NA_1 X
File Transfer
<120> := File ready F_FR_NA_1 X
<121> := Section ready F_SR_NA_1 X
<122> := Call directory, select file, call file, call section F_SC_NA_1 X
<123> := Last section, last segment F_LS_NA_1 X
<124> := Ack file, ack section F_AF_NA_1 X
<125> := Segment F_SG_NA_1 X
<126> := Directory F_DR_TA_1 X
BASIC APPLICATION FUNCTIONS
Station Initialisation
Station initialisation for unbalanced systems OK
Remote initialisation OK
Data acquisition by polling
first procedure: “request user data class 1”. OK
second procedure: “request user data class 2”. OK
Read procedure
for Unbalanced systems C_RD_DATA -
Cyclic data transmission
cyclic data transmission OK
Acquisition of events (for unbalanced systems)
case 1: spontaneous data is NOT available -
case 2: spontaneous data is available -
General Interrogation
Interrogation procedure for unbalanced systems OK
Interrogation procedure for events arrive between interrogation responses -
Global OK
group 1 OK
group 2 OK
Clock synchronisation
Clock synchronisation for unbalanced systems OK
Command transmission
Command procedure for unbalanced systems OK
Direct single command transmission OK
Direct double command transmission OK
Direct regulation command transmission -
Select and execute single command OK
Select and execute double command OK
Select and execute regulation command -
ACTTERM is used OK
No additional definition -
Short pulse duration (duration determined by a system parameter in the outstation) -
Long pulse duration (duration determined by a system parameter in the outstation) -
Persistent output -
File transfer
File transfer in monitor direction X
File transfer in control direction X
Acquisition of transmission delay
Acquisition transmission delay -


Type identifier and cause of transmission assignments for IEC101
Type identification Cause of transmission
1 2 3 4 5 6 7 8 9 10 11 12 13 20-36 37-40 44 45 46 47
<1> M_SP_NA_1 X X X X X X
<2> M_SP_TA_1 OK OK X X X X
<3> M_DP_NA_1 X X X X X X
<4> M_DP_TA_1 OK OK X X X X
<5> M_ST_NA_1 X X X X X X
<6> M_ST_TA_1 OK OK X X X X
<7> M_BO_NA_1 X X X X
<8> M_BO_TA_1 X X X X
<9> M_ME_NA_1 OK X X X X X X
<10> M_ME_TA_1 OK X X X X
<11> M_ME_NB_1 OK X X X X X X
<12> M_ME_TB_1 OK X X X X
<13> M_ME_NC_1 OK X X X X X X
<14> M_ME_TC_1 OK X X X X
<15> M_IT_NA_1 X X X X
<16> M_IT_TA_1 X X X X
<17> M_EP_TA_1 X X X X
<18> M_EP_TB_1 X X X X
<19> M_EP_TC_1 X X X X
<20> M_PS_NA_1 X X X X
<21> M_ME_ND_1 X X X X
<30> M_SP_TB_1 OK OK OK X X X X
<31> M_DP_TB_1 OK OK OK X X X X
<32> M_ST_TB_1 OK OK OK X X X X
<33> M_BO_TB_1 X X X X
<34> M_ME_TD_1 OK X X X X
<35> M_ME_TE_1 OK X X X X
<36> M_ME_TF_1 OK X X X X
<37> M_IT_TB_1 X X X X
<38> M_EP_TD_1 X X X X
<39> M_EP_TE_1 X X X X
<40> M_EP_TF_1 X X X X
<45> C_SC_NA_1 OK OK OK OK OK X X X X
<46> C_DC_NA_1 OK OK OK OK OK X X X X
<47> C_RC_NA_1 X X X X X X X X X
<48> C_SE_NA_1 X X X X
<49> C_SE_NB_1 X X X X
<50> C_SE_NC_1 X X X X
<51> C_BO_NA_1 X X X X
<58> C_SC_TA_1 X X X X X X X X X
<59> C_DC_TA_1 X X X X X X X X X
<60> C_RC_TA_1 X X X X X X X X X
<61> C_SE_TA_1 X X X X
<62> C_SE_TB_1 X X X X
<63> C_SE_TC_1 X X X X
<64> C_BO_TA_1 X X X X
<70> M_EI_NA_1 OK X X X X
<100> C_IC_NA_1 OK X X X X X X
<101> C_CI_NA_1 X X X X
<102> C_RD_NA_1 X X X X X
<103> C_CS_NA_1 OK X X X X X
<104> C_TS_NA_1 X X X X
<105> C_RP_NA_1 OK X X X X X
<106> C_CD_NA_1 OK X X X X X
<110> P_ME_NA_1 X X X X
<111> P_ME_NB_1 X X X X
<112> P_ME_NC_1 X X X X
<113> P_AC_NA_1 X X X X
<120> F_FR_NA_1 X X X X X X X X X X X X X X X X X X X
<121> F_SR_NA_1 X X X X X X X X X X X X X X X X X X X
<122> F_SC_NA_1 X X X X X X X X X X X X X X X X X X X
<123> F_LS_NA_1 X X X X X X X X X X X X X X X X X X X
<124> F_AF_NA_1 X X X X X X X X X X X X X X X X X X X
<125> F_SG_NA_1 X X X X X X X X X X X X X X X X X X X
<126> F_DR_TA_1 X X X X X X X X X X X X X X X X X X X

MarkTomm 5. veebruar 2014, kell 11:03 (EET)

Retrieved from "https://phobos.martem.ee/w/index.php?title=GW6e_Conformance_Test&oldid=1540"