IEC101 Objects
Jump to navigation
Jump to search
For addresses the GWS parameter "Objects Base Address" is 0. Setup file for iex.exe can be found from \\Phobos\d\3_Tehniline\3.Seadmed\RTU_T\TELEM-AI12-T Objects.csv(Latest version svn://phobos.martem.ee/RTU-T-AI12/doc/TestObjectsForIecExe.csv)
| Address | Description | Default Value |
|---|---|---|
| 1 ... 12 | Input 1 ... 12 result after zero zone and deadband1 | Unknown |
| 50 | ZERO ZONE ENABLE - turns zero zone calculation ON or OFF | ON |
| 51 | DEADBAND1 ENABLE - turns deadband1 calculation ON or OFF | ON |
| 100 | CAL DATA GI - turns sending of calibration data ON or OFF on GI | OFF |
| 101 ... 112 | CHx OFFSET - Channel x offset, in ADC digits | Unknown |
| 113 ... 124 | CHx REF - Channel x reference, in ADC digits | Unknown |