Telem-RTA-GPIO

From Phobos Wiki
Revision as of 08:09, 19 April 2012 by Harri (talk | contribs) (Uus lehekülg: '== GPIO list == {| class="wikitable" |- ! Product !! CPU !! revision || reset setup || switch || PWRFAIL <ref name="pwrfail">Shows if external power is available, used to detect ...')
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

GPIO list

Product CPU revision reset setup switch PWRFAIL [1] USB host [2] HW revision [3] ALERT LED RUN LED RST PERIF [4] PWR 1WIRE WDOG EN_5V[5] EN_3.3V EN_PWR [6] HW type [7]
direction - - IN IN IN IN IN OUT OUT OUT OUT OUT OUT OUT OUT IN
--- bit 0 bit 1 bit 2
Telem-RTA-XA PXA270M rev.4 GPIO25 GPIO106 GPIO1 GPIO41 GPIO54 GPIO55 GPIO85 GPIO23 GPIO26 GPIO24 - - - - - GPIO16
Telem-RTA-XA iMX25 rev.5 GPIO0 GPIO10 - - GPIO3 GPIO5 LD22 GPIO2 GPIO4 GPIO8 - - - GPIO11 - -
Telem-RTA-XA iMX25 rev.6 LD16 (pin134) LD8 (pin125) - - GPIO3 (pin151) GPIO5 (pin153) LD22 (pin140) GPIO2 (pin150) GPIO4 (pin152) GPIO8 (pin156) GPIO7 (pin155) GPIO9 (pin157) GPIO6 (pin154) - LD23 (pin141) -
  1. ↑ Shows if external power is available, used to detect power failure
  2. ↑ USB Host attached to client port
  3. ↑ For reading hardware revision
  4. ↑ reset peripherial devices
  5. ↑ modem usb power
  6. ↑ enable power to other devices
  7. ↑ Modem or data concentrator mode
Retrieved from "https://phobos.martem.ee/w/index.php?title=Telem-RTA-GPIO&oldid=886"