Telem-RTA-GPIO

From Phobos Wiki
Revision as of 07:31, 13 December 2012 by Harri (talk | contribs)
Jump to navigation Jump to search

GPIO list

Product CPU revision reset setup switch PWRFAIL [1] USB host [2] HW revision [3] ALERT LED RUN LED RST PERIF [4] PWR 1WIRE WDOG EN_5V EN_3.3V HW type
direction - - IN IN IN IN IN OUT OUT OUT OUT OUT OUT OUT IN
--- bit 0 bit 1 bit 2
Telem-RTA-XA PXA270M rev.4 GPIO25 GPIO106 GPIO1 GPIO41 GPIO54 GPIO55 GPIO85 GPIO23 GPIO26 GPIO24 - - - - GPIO16
Telem-RTA-XA iMX25 rev.5 GPIO0 GPIO10 - - GPIO3 GPIO5 LD22 GPIO2 GPIO4 GPIO8 - - - GPIO11 -
Telem-RTA-XA iMX25 rev.6 LD16 (pin134) LD8 (pin125) - - GPIO3 (pin151) GPIO5 (pin153) - GPIO2 (pin150) GPIO4 (pin152) GPIO8 (pin156) - GPIO9 (pin157) - LD23 (pin141) -
Telem-RTA-XA iMX53 rev.7 LD16 (pin134) LD8 (pin125) - - GPIO3 (pin151) GPIO5 (pin153) - GPIO2 (pin150) GPIO4 (pin152) GPIO8 (pin156) - GPIO9 (pin157) - LD23 (pin141) -
  1. Shows if external power is available, used to detect power failure
  2. USB Host attached to client port
  3. For reading hardware revision
  4. reset peripherial devices