Advanced Networking

Overview

There are many thing that GWS(The Configuration Software for Telem-GW6) can't do. For instance NTP, VLAN and OpenVPN configuration. If something extra is needed then in general user's should create Linux scripts and copy them to Telem-GW6. Sometimes a change of an existing script is enough. Example scripts can be found from Telem-GW6 /usr/local/bin/ folder.

Location of Startup Scripts

/etc/init.d/

Scripts in this folder are run at system startup.

/etc/network/if-ud.d/ and /etc/network/if-down.d/

Scripts in this folder are run when an interface(for instance ethernet interface eth0) becomes available or unavailable. These scripts are needed(used) for instance for configuring the firewall or routing.

/etc/ppp/ip-up or /etc/ppp/ip-down

Scripts in this folder are run when an PPP interface becomes available or unavailable. These scripts are needed(used) for instance for configuring the firewall or routing.

Application Software

SSH

root@telem-gw6-com8$ ssh -v
OpenSSH_5.8p1, OpenSSL 1.0.0d 8 Feb 2011
usage: ssh [-1246AaCfgKkMNnqsTtVvXxYy] [-b bind_address] [-c cipher_spec]
           [-D [bind_address:]port] [-e escape_char] [-F configfile]
           [-I pkcs11] [-i identity_file]
           [-L [bind_address:]port:host:hostport]
           [-l login_name] [-m mac_spec] [-O ctl_cmd] [-o option] [-p port]
           [-R [bind_address:]port:host:hostport] [-S ctl_path]
           [-W host:port] [-w local_tun[:remote_tun]]
           [user@]hostname [command]

As SSH and IEC-104 port 2404 is enabled by default you can request port forwarding. For instance if executing:

ssh -v -N -L 2404:localhost:2404 192.168.12.1 -l scada1

from Ubuntu(probably any other Linux(Unix) machine) redirects Telem-GW6(located at 192.168.12.1) SCADA port over SSH. Provided that Telem-GW6 has an account scada1 and port 22 for SSH is open at substation firewall. In the command:

  -v - verbouse, that is debug messages
  -N - no commands on remote machine
  -L - local port forwarding
  -l - which user to use at remote host

iptables

iptables [1] is the userspace command line program used to configure the Linux 2.4.x and 2.6.x IPv4 packet filtering ruleset.

root@telem-gw6-com8$ iptables -V
iptables v1.4.10

With filter, nat and mangle tables.

Examples

A good example that is in use in production systems is NTP or PPP. Both are located at /usr/local/bin.

VLAN

For instane a script like this:

# Script to show creation of VLAN's
# Copy it to /etc/network/if-up.d and change file permissions to make it executable.
if [ "$IFACE" == "eth0" ]
then
    logger "vlan_enable for interface:$IFACE"

    # So that from ifconfig we see vlan30 not eth0:30
    vconfig set_name_type VLAN_PLUS_VID_NO_PAD

    # If vlan 30 exists remove it
    vconfig rem vlan30

    # Create vlan 30, with vlan id of 30
    vconfig add eth0 30

    # Set ethernet priorities
    vconfig set_egress_map vlan30 0 7
    vconfig set_ingress_map vlan30 0 7

    # Bring new network interface up, that is make it ready for new connections
    ifconfig vlan30 172.22.101.196 netmask 255.255.255.240 txqueuelen 1000 up

    # Add entry to routing table, 172.22.101.193 is router at vlan 30
    route add default gw 172.22.101.193 vlan30
fi

makes a single VLAN called vlan30.

Troubleshooting

For troubleshooting:

• tcpdump [2]: A powerful command-line packet analyzer.

root@telem-gw6-com8$ tcpdump --help
tcpdump version 4.1.1
libpcap version 1.1.1
Usage: tcpdump [-aAbdDefIKlLnNOpqRStuUvxX] [ -B size ] [ -c count ]
		[ -C file_size ] [ -E algo:secret ] [ -F file ] [ -G seconds ]
		[ -i interface ] [ -M secret ] [ -r file ]
		[ -s snaplen ] [ -T type ] [ -w file ] [ -W filecount ]
		[ -y datalinktype ] [ -z command ] [ -Z user ]
		[ expression ]

• netstat [3]: Is a command-line tool that displays network connections.

root@telem-gw6-com8$ netstat --help
BusyBox v1.17.4 (2011-10-17 18:03:09 EEST) multi-call binary.

Usage: netstat [-laentuwxr]

Display networking information

Options:
	-l	Display listening server sockets
	-a	Display all sockets (default: connected)
	-e	Display other/more information
	-n	Don't resolve names
	-t	Tcp sockets
	-u	Udp sockets
	-w	Raw sockets
	-x	Unix sockets
	-r	Display routing table