GW6e Conformace Test

From Phobos Wiki
Revision as of 16:16, 22 October 2013 by MarkTomm (talk | contribs) (Uus lehekülg: '== GW6e Conformace Test == {| class="wikitable" |- ! Implemented transmission system |- | Unbalanced system || - |- ! Network configuration |- | Point-to-point || - |- | Multidro...')
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

GW6e Conformace Test

Implemented transmission system
Unbalanced system -
Network configuration
Point-to-point -
Multidrop -
PHYSICAL LAYER
Transmission speed
1200 bit/s -
2400 bit/s -
4800 bit/s -
9600 bit/s -
19200 bit/s -
LINK LAYER
Link transmission procedure
Unbalanced transmission -
Address field of the link
One octet -
Two octets -
Frame length
Unstructured -
Common address of ASDU
One octet -
Information object address
Two octets -
Three octets -
Unstructured -
Cause of transmission
One octet -
SELECTION OF STANDARD ASDUS
Process information in monitor direction
<1> := Single-point information -
<2> := Single-point information with time tag -
<3> := Double-point information -
<4> := Double-point information with time tag -
<5> := Step position information -
<6> := Step position information with time tag -
<9> := Measured value, normalised value -
<10> := Measured value, normalised value with time tag -
<11> := Measured value, scaled value -
<12> := Measured value, scaled value with time tag -
<13> := Measured value, short floating point value -
<14> := Measured value, short floating point value with time tag -
<30> := Single point information with full time -
<31> := Double point information with full time -
<32> := Step position information with full time -
<34> := Measured value, normalised value with full time -
<35> := Measured value, scaled value with full time -
<36> := Measured value, short floating point value with full time -
Process information in control direction
<45> := Single command -
<46> := Double command -
<47> := Regulating step command -
<58> := Single command with time tag CP56Time 2a -
<59> := Double command with time tag CP56Time 2a -
<60> := Regulating step command with time tag CP56Time 2a -
System information in monitor direction
<70> := End of initialisation -
System information in control direction
<100> := Interrogation command -
<102> := Read command -
<103> := Clock synchronisation command -
<105> := Reset process command -
<106> := Delay acquisition command -
File Transfer
<120> := File ready -
<121> := Section ready -
<122> := Call directory, select file, call file, call section -
<123> := Last section, last segment -
<124> := Ack file, ack section -
<125> := Segment -
<126> := Directory -