GwLin Changelog: Difference between revisions

From Phobos Wiki
Jump to navigation Jump to search
Line 6: Line 6:


== Changelog ==
== Changelog ==
* 2016.11.22-next-02-aff0af1
: IEC-103 support multiple DO with same v-addresses
* 2016.11.15-next-02-b43c191
* 2016.11.15-next-02-b43c191
: Change non-ASCII characters to * in Port and Device commments (2751)
: Change non-ASCII characters to * in Port and Device commments (2751)

Revision as of 14:23, 22 November 2016

TELEM-GW6e, TELEM-GWM53 and TELEM-GWM25

Milestones

  • DNP3
  • linux kernel 4.x

Changelog

  • 2016.11.22-next-02-aff0af1
IEC-103 support multiple DO with same v-addresses
  • 2016.11.15-next-02-b43c191
Change non-ASCII characters to * in Port and Device commments (2751)
  • 2016.11.15-next-01-5dc3aa7
IEC-104 event loss after disconnect fix (2725)
  • 2016.11.04-next-02-3a9808a
Set object flags to Invalid instead of NotTopical on startup
SPA-Bus objects not going not topical on Timeout fix
SPA-Bus potential segfault fix
  • 2016.11.04-next-01-51a8c40
IEC-101,104 | DO invert fix sending ACK with inverted address
init | S99phy fix toggling LAN power and wait longer
init | fix starting modem then date is in the start of epoch (1970)
init | Script fixes for fresh device with linux default time
  • 2016.10.19-next-09-3e89e79
CIFS support in kernel for network mounts
  • 2016.10.08-next-01-c91481f
IEC-101,104 | GI Switch per object (requires GWS 6.1.0.2068+)
IEC-101,104 | DO can have 2 downstream addresses.
init | optimizations for FTDI eeprom software
init | getwdbootmsg fixes
init | major refactoring. Performance & readability fixes
  • 2016.10.05-next-06-bb13408
Protocol | Remove event sorting by time when sending to upstream
Protocol | upstream events faster
IEC-103 | Micom workarounds
  • 2016.10.03-next-02-1cb7e5f
Protocol | time sync interval from XML implementation
SPA-Bus | fix event time is it is assumed that event came before last minut change
SPA-Bus | request L, then poll once and change device
SPA-Bus | delay next device for 50ms after timesync
Syslog | Add possibility to change loglevel and remote server port
ntp | do not restart ntp if only gps is configured (2711)
ntp | avoid frequent ntp restarts by other scripts
modem | avoid frequent modem restart by multiple scripts (only 1 restart allowed per one minute).
modem | rewrite telit modem reseting as described in telit manual
init | fix socat sometimes creating /dev/tty* as ordinary file instead of letting modem driver to do it.
init | performance fixes
  • 2016.09.26-next-01-91e178f
SPA-Bus | Scaling fix (2689)
Logging | raw port log in ASCII
  • 2016.09.23-next-01-00fde37 (2721)
SPA-Bus | event can have effect on multiple objects
  • 2016.09.19-next-01-c0127ec (2693)
Protocol | Events are sent upstream in order of the lowest timetag
  • 2016.09.08-next-01-526b387
IEC | fix IEC 101 UB variable length frame bigger than 255 issue
Formula | fix double masking in fomrula ???
  • 2016 year device fw and GWS 6.1.0.2064
NoMainLog for formula
  • 2016.08.25-next-03-b45984d
Modbus | ai_bit DI type
Modbus | DO: define ON and OFF address in the same cell
improved logging
SPA-Bus | poll all
  • 2016.08.23-next-01-d702b81
Logging | fine tuned device initialization logging. Old device oriented (GW6, RTA)
fix DO Inversion bug (2702)
  • 2016.07.28-next-06-3d426af
Device CPU frequency lowered from 1.2GHz to 1.0GHz | Improved ssh key generation and license cheking
  • 2016.05.11-next-02-e02304a !Use this if unsure!
SPA-Bus | minor fixes for rare nack and timeout cases
SPA-Bus | commented out object sorting
  • 2016.05.04-next-01-64e4492
SPA-Bus | protocol subtype for ABB ref542
SPA-Bus | poll L messages after 5 object poll requests
SPA-Bus | mode 1 implementation: poll multiple objects in one request (2635)
SPA-Bus | DO: define ON and OFF address in the same cell
SPA-Bus | channel number definable for every event number (2637)
SPA-Bus | event numbers for Intermediate and Error states
SPA-Bus | fallback fixes (2658)
SPA-Bus | switch between devices on same port after L message
SPA-Bus | define incoming DI object type (Dobule/Single) (2654)
SD card licence implementation (2592)
remove non ASCII characters from object comment (2577)
  • [22.03.2016]
1-wire segfault on bing temp. change fix (2640)
  • [11.03.2016]
IEC-104 object type priorities fix. Big amounts of AI data prevented DI events propagation. (2625)
  • [23.02.2016]
webserver v2 IE11 not working fix
  • [11.02.2016]
physical interface checker script implementation
  • [10.02.2016]
NEW_DATABASE formulas numerous fixes
ADDED LIB TO PROJECT: fastformat
logging optimizations using fastformat. VMX25 up to 10x faster
  • [26.01.2016]
GWS 'Get logs' acquires n+1 more rotating logs
  • [16.12.2015]
license additions to support no modem GWM (2565)
  • [17.11.2015]
longer interval for some tasks
SyncDatabaseToFile 2s->5s
ProcessRetranslation 10ms->500ms
explicitly sync db backup to non-volatile memory only on reset/low-power.
  • [06.11.2015]
IEC-101/104 QOC (Qualifier of command) implementation (2495)
  • [05.11.2015]
AI scaling rewrite (COMPATIBILITY BREAK)
virtual I/O object pair crash app if invalid address fix (2572)
  • [30.10.2015]
web-server v2 shows device eth info (2532)
  • [16.10.2015]
fix SPA-Bus polling delay (2546)
  • [14.10.2015]
IEC101/104 type 105 C_RP_NA_1 (reset process) implementation (2498)
IEC101/104 GI command via DO implementation (2499)
  • [13.10.2015]
zero value deadband implementation (2536)
  • [24.09.2015]
DO/AO stops IEC-101 messages fix for devices using old database (2527)
allow bigger conf size for NEW_DATABASE devices
SETUP_WITH_XML_BIN_SIZE 500KB->1.5MB
EXTRACTED_XML_SETUP_SIZE 6MB->20MB
  • [07.09.2015]
GWM IO-board + 101-104 conversion not working fix (2520)
  • [25.08.2015]
IEC-61850 mem-leak/consumption fixes
remove BIT_INVALID_TIME from BIT_VALUE_CHANGED_MASK
  • [22.08.2015]
devie booting time nnX times faster (2472)
  • [23.07.2015]
ADDED LIB TO PROJECT: boost_chrono to source.pro (websocketpp 0.6.0 depends)
  • [08.06.2015]
application segmentation fault fix (2429)
  • [27.04.2015]
DI fallback bug fix (2312)
  • [23.04.2015]
DI object double inversion bug fix (2345)
  • [21.04.2015]
no flags not working fix (2194)
  • [24.03.2015]
Periodical GI implementation for all protocols (every 5th minute of hour)
  • [16.03.2015]
Telem Master protocol implementation
  • [29.01.2015]
IEC-10x ASDU transfer implementation
  • [30.10.2014]
IEC-101B serial communication improvements
  • [23.10.2014]
No main/CSV log for individual objects
  • 2014.01.13-next-01-2a5df30
added uINT16 (unsigned 16bit integer) in modbus protocol. (also update gws)
  • 2014.01.09-next-01-2fae2d9
fix IEC104 bug in GW6
  • 2014.01.07-next-01-8180155
fix fallback (GW6e and GWM), "NONE" protocol, device "in use"=no, FP-to-normalised conversion, deadband issues, IEC104 bug in GW6e. (also update gws)
  • 2013.11.18-next-04
fix IEC-104 bug (mark data as NT if connection to IEC-104 slave is lost and parameter "failed query count for disabling contr." > 1)
  • 2013.11.12-next01
fix AO feedback bug in GW6 and RTA-A
  • 2013.11.04-next
time invalid flag for GW6 and RTA-A (also requires DSP/RTC software update!)
  • 2013.10.24-next
IEC101-to-IEC104 short time to long time conversion
  • 2013.09.16-next07
configurable COT=2 Bytes for IEC101b
  • 2013.09.09-next01
configurable COT=2 Bytes for IEC101ub
  • 2013.07.12-next02
write modem status to /var/log/modem.st

Old Devices RTA-A and GW6

Latest Firmware

Last fw version GW6: 2015.12.11-develop-01-104a492

Last fw version RTA-A M502: 2014.12.23-next-01-f3f6d0b

Last fw version RTA-A M501: 2014.01.09-next-01-2fae2d9

GW6-1206

  • Timezones for ports and system.

Userland

  • dnsmasq
  • iperf

Kernel

  • iptables: Support for -m limit. For instance:
 /usr/sbin/iptables -t filter -A INPUT -p tcp --dport 2404 --sport 1024:65535 -m state --state NEW -m limit --limit 25/minute --limit-burst 100 -j ACCEPT
  • tc: Basic support. For instance:
/sbin/tc qdisc del dev eth0 root    2> /dev/null > /dev/null
/sbin/tc qdisc del dev eth0 ingress 2> /dev/null > /dev/null

/sbin/tc qdisc add dev eth0 handle ffff: ingress
/sbin/tc filter add dev eth0 parent ffff: protocol ip prio 1 u32 match ip src 0.0.0.0/0 police rate 512kbit burst 1m drop flowid :1

/sbin/tc qdisc add dev eth0 root handle 1: cbq avpkt 1000 bandwidth 20mbit 
/sbin/tc class add dev eth0 parent 1: classid 1:1 cbq rate 512kbit allot 1500 prio 1 bounded isolated 
/sbin/tc class add dev eth0 parent 1: classid 1:2 cbq rate 512kbit allot 1500 prio 2 bounded isolated
/sbin/tc class add dev eth0 parent 1: classid 1:3 cbq rate 512kbit allot 1500 prio 3 bounded isolated
/sbin/tc filter add dev eth0 parent 1: protocol ip prio 16 u32 match ip protocol 1 0xff flowid 1:1
/sbin/tc filter add dev eth0 parent 1: protocol ip prio 1 u32 match ip sport 80 0xffff flowid 1:2
/sbin/tc filter add dev eth0 parent 1: protocol ip prio 1 u32 match ip sport 22 0xffff flowid 1:3

GW6-1204

  • IEC104: Respond to message sent to broadcast ASDU (0xFFFF)
  • IEC-62056: mask incoming data with 0x7F (ASCII protocol)
  • Serial ports: Suppress echo
  • WebPage: Long awaited by all interenet browsers the favicon.ico

GW6-1202

  • IEC104: Fix possible event loss on ethernet cable removal.
  • Formula: Do not generate control event, on first successful calculation.

GW6-1200

  • Firmware version readable through internal WebServer
  • Fix possible event loss when lots of changes arrive for one input.
  • GPRS-modem protocol: if connection to internet is lost, all TCP client connections are closed
  • IEC104: force long-time format

GW6-1198

  • IEC101/103 Unbalanced Master: add feature polling delay
  • When sending a control operation over IEC103 channel with many devices. Speed up receiving of control response.

GW6-1196

  • Connection loss with RTC-board does not result in watchdog reset.
    • Symptoms: device will reset after 20 seconds of running.
  • Device will write system boot count and application start count to console.log. Latest values can be found in /var/local/telem/stats

RTA-A-1192

  • RTA-A: possible to define DO object to clear annunciator LED 's
  • Modbus Master: Fix receiving of negative 16bit normalized values.

GW6-1190

  • Added new update pack type app-only.
    • Note: This update pack type should only be used on device with SW version 1190 or later.
    • This update will not overwrite system files - less chance for bricking if something goes wrong (accidental power loss or reset).
  • Generate /etc/network/interfaces file once after receiving new setup.
  • New protocol type IEC ^ Setup
    • Only reading and writing of device setup is allowed on this Port.
    • Allows faster booting of device with a lot of unused Up-channel ports.