Gw XML setup: Difference between revisions

From Phobos Wiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 48: Line 48:
  </Address>
  </Address>
==== MODBUS ====
==== MODBUS ====
Value: integer
  <Address>2</Address>
  <Address>2</Address>
==== IEC62056-21 ====
==== IEC62056-21 ====
Value: string
Can be empty if only one device on channel.
  <Address>addr123</Address>
  <Address>addr123</Address>
== Element: Port ==
== Element: Port ==
Line 94: Line 98:
  <Gateway>192.168.0.1</Gateway>
  <Gateway>192.168.0.1</Gateway>
  </Interface>
  </Interface>
=== VLAN ===
Other child elements required for Interface when using VLAN
<VlanId>10</VlanId>
<VlanIngressQos>4</VlanIngressQos>
<VlanEgressQos>4</VlanEgressQos>
<IpIngressQos>0</IpIngressQos>
<IpEgressQos>0</IpEgressQos>

Revision as of 16:16, 16 May 2011

Element: Setup

The XML setup starts with the tag Setup. The entire setup is contained in this element.

<Setup />

This element contains:

  • Element: Device
    • At least one element of this type.
  • Attribute: device
    • If more than one Device element available. This attribute specifies the id of the Device to use as current setup.

Element: Device

This element contains setup for a specific device. This might be Gw itself or some substation device or SCADA device.

This element contains:

Element: Channel

This element contains:

Element: Protocol

<Protocol comment="protocol8" id="prot_8_0">
	<Address />
	<CommunicationDelay unit="millisecond">0</CommunicationDelay>
	<PollingTimeout unit="millisecond">500</PollingTimeout>
	<TimeSync enabled="false"/>
	<RemoveCount>5</RemoveCount>
	<RemoveTime unit="second">20</RemoveTime>
	<ReplaceTime>false</ReplaceTime>
	<Type SubVersion="0" isMaster="false">IEC101UnBalanced</Type>
</Protocol>

Element: Address

This elements contents depend on the protocol selected

Iec-10x

<Address>
	<LinkAddress>1</LinkAddress>
	<LinkAddressLength>1</LinkAddressLength>
	<AsduAddress>1</AsduAddress>
	<AsduAddressLength>2</AsduAddressLength>
	<ObjectAddressLength>2</ObjectAddressLength>
</Address>

MODBUS

Value: integer

<Address>2</Address>

IEC62056-21

Value: string

Can be empty if only one device on channel.

<Address>addr123</Address>

Element: Port

Serial port

<Port class="SerialPortSetup">
	<BaudRate>9600</BaudRate>
	<DataBits>8</DataBits>
	<StopBits>1</StopBits>
	<Parity>none</Parity>
	<FlowControl>none</FlowControl>
</Port>

TCP/IP server

<Port class="TcpIpServerSetup">
	<PortNumber>80</PortNumber>
	<ClientIpMask>0.0.0.0</ClientIpMask>
	<Interface>eth0</Interface>
</Port>

TCP/IP client

<Port class="TcpIpClientSetup" name="16">
	<PortNumber>502</PortNumber>
	<IpAddress>10.0.0.89</IpAddress>
	<Interface>eth0</Interface>
</Port>

Virtual port

They are ports 3-5 on GW6.

<Port class="VirtualPortSetup">
	<Port class="SerialPortSetup">
	      <BaudRate>9600</BaudRate>
	      <DataBits>8</DataBits>
	      <StopBits>1</StopBits>
	      <Parity>none</Parity>
	      <FlowControl>none</FlowControl>
	</Port>
</Port>

Element: Objects

Element: Interfaces

Network setup

Has at least one Interface element.

<Interface name="eth0">
	<IpAddress>192.168.0.111</IpAddress>
	<Netmask>255.255.255.0</Netmask>
	<Gateway>192.168.0.1</Gateway>
</Interface>

VLAN

Other child elements required for Interface when using VLAN

<VlanId>10</VlanId>
<VlanIngressQos>4</VlanIngressQos>
<VlanEgressQos>4</VlanEgressQos>
<IpIngressQos>0</IpIngressQos>
<IpEgressQos>0</IpEgressQos>