IEC101 Objects: Difference between revisions

From Phobos Wiki
Jump to navigation Jump to search
(Uus lehekülg: '<table border="1"> <th>Address</th><th>Description</th> <tr> <td>1 .. 12</td> <td>Input 1 ... 12 result after zero zone and deadband1</td> </tr> </table>')
 
No edit summary
 
(12 intermediate revisions by one other user not shown)
Line 1: Line 1:
For all addresses the GWS parameter "Objects Base Address" is 0.
Setup file for iex.exe can be found from \\Phobos\d\3_Tehniline\3.Seadmed\RTU_T\TELEM-AI12-T Objects.csv(Latest version svn://phobos.martem.ee/RTU-T-AI12/doc/TestObjectsForIecExe.csv)
<table border="1">
<table border="1">
  <th>Address</th><th>Description</th>
  <th>Address</th><th>Description</th><th>Default Value</th>
  <tr>
  <tr>
   <td>1 .. 12</td>
   <td>1 ... 12</td>
   <td>Input 1 ... 12 result after zero zone and deadband1</td>
   <td>Input 1 ... 12 result after zero zone and deadband1</td>
  <td>Unknown</td>
</tr>
<tr>
  <td>50</td>
  <td>ZERO ZONE ENABLE - turns zero zone calculation ON or OFF</td>
  <td>ON</td>
</tr>
<tr>
  <td>51</td>
  <td>DEADBAND1 ENABLE - turns deadband1 calculation ON or OFF</td>
  <td>ON</td>
</tr>
<tr>
  <td>100</td>
  <td>CAL DATA GI - turns sending of calibration data ON or OFF on GI</td>
  <td>OFF</td>
</tr>
<tr>
  <td>101 ... 112</td>
  <td>CHx OFFSET - Channel x offset, in ADC digits</td>
  <td>Unknown</td>
</tr>
<tr>
  <td>113 ... 124</td>
  <td>CHx REF - Channel x reference, in ADC digits</td>
  <td>Unknown</td>
</tr>
<tr>
<tr>
  <td>125 ... 136</td>
  <td>AIx OFFSET - AI x offset, in ADC digits. Can be different from CHx OFFSET if AIx is configured for voltage. For voltage a PGA is used.</td>
  <td>Unknown</td>
</tr>
<tr>
  <td>200</td>
  <td>CORR ENABLE - turns ON or OFF all calculations of ADC input</td>
  <td>ON</td>
</tr>
<tr>
  <td>1000</td>
  <td>LED RED - turns ON or OFF ALERT LED</td>
  <td>OFF</td>
</tr>
<tr>
  <td>2000</td>
  <td>ENABLE DEBUG - turns ON or OFF sending of software debug parameters. Debug parameters start with address 2001.</td>
  <td>OFF</td>
</tr>
<tr>
  <td>2001</td>
  <td>CLOCK TEST DI - Value is the state of LED RED, timestamp is the current time of TELEM-AI12</td>
  <td>Unknown</td>
</tr>
<tr>
  <td>2002</td>
  <td>ERROR DEADLINE - counter for task deadlines. If this value increases then TELEM-AI12 is not working correctly</td>
  <td>0</td>
</tr>
<tr>
  <td>2003</td>
  <td>ERROR AD73360 - counter for ADC AD73360. If this value increases then AD73360 is not working correctly</td>
  <td>0</td>
</tr>
<tr>
  <td>2004</td>
  <td>ERROR QUEUE AD73360 - counter for ADC AD73360 queue. If this value increases then AD73360 is not working correctly</td>
  <td>0</td>
</tr>
<tr>
  <td>2005</td>
  <td>ERROR QUEUE DATA1 - counter for IEC101 Data Class1 queue. If this value increases then it is an indication of communication errors.</td>
  <td>0</td>
</tr>
<tr>
  <td>2006</td>
  <td>ERROR SPONT CNT - counter for spontaneous events. If this value increases then it is an indication that some events are dropped. Indication of communication errors.</td>
  <td>0</td>
</tr>
<tr>
  <td>2007</td>
  <td>ERROR AI IO - AD73360 serial communication errors. In mixed mode 16th bit must me 0</td>
  <td>0</td>
</tr>
<tr>
  <td>2008</td>
  <td>ERROR AI AVG - AD73360 input accumulator errors. Averaged channel result is larger than 16bits.</td>
  <td>0</td>
</tr>
<tr>
  <td>2009</td>
  <td>ERROR AI MATH - input conversion and calibration errors from calculation.</td>
  <td>0</td>
  </tr>
  </tr>
</table>
</table>

Latest revision as of 12:58, 3 February 2011

For all addresses the GWS parameter "Objects Base Address" is 0.

Setup file for iex.exe can be found from \\Phobos\d\3_Tehniline\3.Seadmed\RTU_T\TELEM-AI12-T Objects.csv(Latest version svn://phobos.martem.ee/RTU-T-AI12/doc/TestObjectsForIecExe.csv)


AddressDescriptionDefault Value
1 ... 12 Input 1 ... 12 result after zero zone and deadband1 Unknown
50 ZERO ZONE ENABLE - turns zero zone calculation ON or OFF ON
51 DEADBAND1 ENABLE - turns deadband1 calculation ON or OFF ON
100 CAL DATA GI - turns sending of calibration data ON or OFF on GI OFF
101 ... 112 CHx OFFSET - Channel x offset, in ADC digits Unknown
113 ... 124 CHx REF - Channel x reference, in ADC digits Unknown
125 ... 136 AIx OFFSET - AI x offset, in ADC digits. Can be different from CHx OFFSET if AIx is configured for voltage. For voltage a PGA is used. Unknown
200 CORR ENABLE - turns ON or OFF all calculations of ADC input ON
1000 LED RED - turns ON or OFF ALERT LED OFF
2000 ENABLE DEBUG - turns ON or OFF sending of software debug parameters. Debug parameters start with address 2001. OFF
2001 CLOCK TEST DI - Value is the state of LED RED, timestamp is the current time of TELEM-AI12 Unknown
2002 ERROR DEADLINE - counter for task deadlines. If this value increases then TELEM-AI12 is not working correctly 0
2003 ERROR AD73360 - counter for ADC AD73360. If this value increases then AD73360 is not working correctly 0
2004 ERROR QUEUE AD73360 - counter for ADC AD73360 queue. If this value increases then AD73360 is not working correctly 0
2005 ERROR QUEUE DATA1 - counter for IEC101 Data Class1 queue. If this value increases then it is an indication of communication errors. 0
2006 ERROR SPONT CNT - counter for spontaneous events. If this value increases then it is an indication that some events are dropped. Indication of communication errors. 0
2007 ERROR AI IO - AD73360 serial communication errors. In mixed mode 16th bit must me 0 0
2008 ERROR AI AVG - AD73360 input accumulator errors. Averaged channel result is larger than 16bits. 0
2009 ERROR AI MATH - input conversion and calibration errors from calculation. 0