IEC101 Objects: Difference between revisions

From Phobos Wiki
Jump to navigation Jump to search
No edit summary
No edit summary
 
Line 59: Line 59:
  <tr>
  <tr>
   <td>2001</td>
   <td>2001</td>
   <td>CLOCK TEST DI - Value is the state of synchronization selection(1 for internal RTC 0 for external signal), timestamp is the current time of TELEM-AI12</td>
   <td>CLOCK TEST DI - Value is the state of LED RED, timestamp is the current time of TELEM-AI12</td>
   <td>Unknown</td>
   <td>Unknown</td>
  </tr>
  </tr>
Line 79: Line 79:
  <tr>
  <tr>
   <td>2005</td>
   <td>2005</td>
  <td>ERROR HZ - counter for syncronization errors. If this value increases then TELEM-AI12 has encountered syncronization signals that are much longer or shorter than 1 second.</td>
  <td>0</td>
</tr>
<tr>
  <td>2006</td>
   <td>ERROR QUEUE DATA1 - counter for IEC101 Data Class1 queue. If this value increases then it is an indication of communication errors.</td>
   <td>ERROR QUEUE DATA1 - counter for IEC101 Data Class1 queue. If this value increases then it is an indication of communication errors.</td>
   <td>0</td>
   <td>0</td>

Latest revision as of 12:58, 3 February 2011

For all addresses the GWS parameter "Objects Base Address" is 0.

Setup file for iex.exe can be found from \\Phobos\d\3_Tehniline\3.Seadmed\RTU_T\TELEM-AI12-T Objects.csv(Latest version svn://phobos.martem.ee/RTU-T-AI12/doc/TestObjectsForIecExe.csv)


AddressDescriptionDefault Value
1 ... 12 Input 1 ... 12 result after zero zone and deadband1 Unknown
50 ZERO ZONE ENABLE - turns zero zone calculation ON or OFF ON
51 DEADBAND1 ENABLE - turns deadband1 calculation ON or OFF ON
100 CAL DATA GI - turns sending of calibration data ON or OFF on GI OFF
101 ... 112 CHx OFFSET - Channel x offset, in ADC digits Unknown
113 ... 124 CHx REF - Channel x reference, in ADC digits Unknown
125 ... 136 AIx OFFSET - AI x offset, in ADC digits. Can be different from CHx OFFSET if AIx is configured for voltage. For voltage a PGA is used. Unknown
200 CORR ENABLE - turns ON or OFF all calculations of ADC input ON
1000 LED RED - turns ON or OFF ALERT LED OFF
2000 ENABLE DEBUG - turns ON or OFF sending of software debug parameters. Debug parameters start with address 2001. OFF
2001 CLOCK TEST DI - Value is the state of LED RED, timestamp is the current time of TELEM-AI12 Unknown
2002 ERROR DEADLINE - counter for task deadlines. If this value increases then TELEM-AI12 is not working correctly 0
2003 ERROR AD73360 - counter for ADC AD73360. If this value increases then AD73360 is not working correctly 0
2004 ERROR QUEUE AD73360 - counter for ADC AD73360 queue. If this value increases then AD73360 is not working correctly 0
2005 ERROR QUEUE DATA1 - counter for IEC101 Data Class1 queue. If this value increases then it is an indication of communication errors. 0
2006 ERROR SPONT CNT - counter for spontaneous events. If this value increases then it is an indication that some events are dropped. Indication of communication errors. 0
2007 ERROR AI IO - AD73360 serial communication errors. In mixed mode 16th bit must me 0 0
2008 ERROR AI AVG - AD73360 input accumulator errors. Averaged channel result is larger than 16bits. 0
2009 ERROR AI MATH - input conversion and calibration errors from calculation. 0