TELEM-GW6 testing manual: Difference between revisions

From Phobos Wiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 10: Line 10:
# Testimise protokolli asukoht serveris: 7_Seadmete testprotokollid/Telem-GW6  
# Testimise protokolli asukoht serveris: 7_Seadmete testprotokollid/Telem-GW6  


==Checking the time in Telem-GW6==
=Checking the time in Telem-GW6=
===Create a new session for date checking===
==Create a new session for date checking==
  The remote command will show you the current time in GW6 once per second
  The remote command will show you the current time in GW6 once per second
# Open '''putty'''
# Open '''putty'''

Revision as of 19:37, 10 February 2011

Testimise juhend

  1. Ühenda 2 pordi kaudu seade Telem-GW6 kontsentraator TELEM2000-ga. Seadme ja TELEM2000 vahel peab tekkima side.
  2. Tee seadmele reset 3, ehk taasta default setup.
  3. Kontrolli, kas pordid 1-13 lähevad sidesse. Tegemist on erinevate sideprotokollide ja portidega.
  4. Ühenda GPS-porti GPS interface ja kontolli kas GPS-aeg muudab kontrolleris aja.
  5. Kontrolli, kas USB port on korras.
  6. Kontrolli, kas ETHERNET kaudu side töötab.
  7. Kanna jooksvalt saadud tulemused testimise protokolli.
  8. Testimise protokolli asukoht serveris: 7_Seadmete testprotokollid/Telem-GW6

Checking the time in Telem-GW6

Create a new session for date checking

The remote command will show you the current time in GW6 once per second
  1. Open putty
  2. Category: Connection->Data
    • Auto-login username (ALT+U) : martem
  3. Category: Connection->SSH
    • Remote command (ALT+R): watch -n1 date
  4. Category: Session
    1. Enter a new name for session
    2. Save

Using saved session

  1. Category: Session
  2. Select the session you created from the list (ALT+E)
  3. Load selected session (ALT+L)
  4. Change the host name (ALT+N)
  5. Change connection type to SSH (ALT+S)
  6. Open connection (ALT+0)
  7. Enter password: Xooviet0