Telem-GW-GPIO
Jump to navigation
Jump to search
GPIO list
| Product | CPU | revision | reset setup | PWRFAIL[1] | USB host[2] | DI[3] | HW revision[4] | ALARM LED | RUN LED | RS485 speed | RST PERIF[5] | PWRMON[6] | GPRS on/off[7] | GPRS reset[8] | EN_5V | EN_3.3V | EN_PWR[9] | SD socket WP | Timesync[10] | RPWRFAIL[11] | ||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| direction | - | - | IN | IN | IN | IN | IN | OUT | OUT | OUT | OUT | IN | OUT | OUT | OUT | OUT | OUT | IN | IN | IN | ||||
| --- | bit 0 | bit 1 | bit 2 | bit 0 | bit 1 | bit 2 | ||||||||||||||||||
| Telem-GW6 | PXA270M | rev.4a | GPIO25 | GPIO1 | GPIO41 | GPIO12 | GPIO14 | GPIO106 | GPIO54 | GPIO55 | GPIO85 | GPIO23 | GPIO26 | GPIO17 | GPIO24 | - | - | - | - | - | - | - | - | - |
| Telem-GW6 | iMX | - | GPIO0 | GPIO1 | - | - | - | - | GPIO3 | GPIO5 | GPIO10 | GPIO2 | GPIO4 | - | GPIO8 | - | - | - | - | - | GPIO11 | GPIO6 | GPIO7 | GPIO9 |
| Telem-GWM | - | - | GPIO0 | GPIO1 | - | - | - | - | GPIO3 | GPIO5 | - | GPIO2 | GPIO4 | - | GPIO8 | GPIO10 | GPIO9 | GPIO7 | GPIO6 | GPIO11 | - | - | - | - |
- ↑ Shows if external power is available, used to detect power failure
- ↑ USB Host attached to client port
- ↑ Telem-GW6 base
- ↑ For reading hardware revision
- ↑ reset peripherial devices
- ↑ GPRS power monitor
- ↑ ON/OFF (GPRS modem)
- ↑ GPRS modem reset
- ↑ enable power to other devices
- ↑ not used on the proto pcb
- ↑ reserv power fail (not used on the proto pcb)