View source for GWM and GW6e Configuring Options

All configurations are currently made with GWS. In future, there may be more options.

There are many ways to transfer resulting '''*.tar.xz''' configuration to device:
* Use GWS (uses pscp.exe)
* copy with scp/pscp (secure copy)
* (new) use console with Zmodem protocol.
* (new) use webservers config tab

Same options are available for firmware too. But not all of them are convenient.

== Configuration ==


=== GWS ===


=== scp ===


=== Console ===

Console speed is fixed to baudrate 115200.

Transfering 1MB file takes about 1.5 minutes.

For Zmodem GWM/GW6e has '''rz''' for receiving and '''sz''' for sending files from '''lrzsz'''. It also supports X/Ymodem protocols.

Check <code>rz --help</code> and <code>sz --help</code> for options.

<code>rz</code> can be cancelled by pressing <code>Ctrl-X</code> few times.

==== using minicom (linux) ====

Minicom uses '''lrzsz''' package for Zmodem functionality.
We assume that minicom is configured correctly for console connection.

Steps to send file to device:

* Find serial port
<pre>
DEMO ~ $ ls -l /dev/serial/by-id/usb-FTDI_FT230X_Basic_UART_DN01CIHT-if00-port0
lrwxrwxrwx 1 root root 13 Sep  4 16:01 /dev/serial/by-id/usb-FTDI_FT230X_Basic_UART_DN01CIHT-if00-port0 -> ../../ttyUSB2
</pre>
* Connect with minicom
<pre>
minicom -D /dev/serial/by-id/usb-FTDI_FT230X_Basic_UART_DN01CIHT-if00-port0
</pre>
* Login with root user
* Start receiving process in device with <code>rz -b </code>
[[File:Zmodem0.png]]
* Start sending process from minicom by pressing '''Ctrl-A''' and '''S''' and choose <code>zmodem</code>.
[[File:Zmodem1.png]]
* Choose file to send, mark file with space
[[File:Zmodem2.png]]
(upload will fail if file with same name already exists)
* Press enter if transfer is finished
[[File:Zmodem3.png]]
* move file to correct location and reboot.
<pre>
mv newfile.tar.xz /home/martem/setup.new.tar.xz
reboot
</pre>

==== TeraTerm (Windows) ====

Download required software if needed:
* FTDI drivers: http://www.ftdichip.com/Drivers/D2XX.htm
* TeraTerm: https://ttssh2.osdn.jp/index.html.en

Send files:
* Make sure that usb serial is properly configured. (From TeraTerm: Setup->Serial port...)
* Press enter to see login prompt and login with root user
* Start receiving process in device with <code>rz -b</code>
[[File:Zmodem_win0.png]]
* Start sending process from TeraTerm
[[File:Zmodem_win1.png]]
* move file to correct location and reboot.
<pre>
mv newfile.tar.xz /home/martem/setup.new.tar.xz
reboot
</pre>

=== Web ===


== Firmware ==

=== GWS ===

=== scp ===

=== Console ===

=== Web ===