Telem-RTA-A: Difference between revisions

From Phobos Wiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 29: Line 29:
#*/disk/RtaMain
#*/disk/RtaMain
#*/disk/runfirst.sh
#*/disk/runfirst.sh
#Wait ~30 seconds
#Wait ~30 seconds, so everything is written to flash.
#Reset RTA-A
#Reset RTA-A
#Wait ~30 seconds until RTA-A starts
#Wait ~30 seconds until RTA-A starts, if not running by then, update failed.

Revision as of 08:11, 31 May 2011

M501 Default Settings

Setting default
Default IP 192.168.2.127
Netmask 255.255.255.0
Login root
Password root

Software upgrades for Linux

  • You can find the software here
    • \\Phobos\d\3_Tehniline\Tarkvara myygiks\RTA-A

Updating

  1. Login with FTP
    • If you're using a new M501 board, use the details above
    • If it's a configured RTA-A then use the IP you have configured to the device.
  2. Copy all files except RtaMain to /disk/
    • If it fails, try again.
  3. Copy RtaMain to /disk/
    • If RTA-A resets during the copy process, you might need to use 192.168.2.127 as the FTP IP address
    • Try again
  4. Allow execution permissions for these files
    • /disk/gateway.sh
    • /disk/RtaMain
    • /disk/runfirst.sh
  5. Wait ~30 seconds, so everything is written to flash.
  6. Reset RTA-A
  7. Wait ~30 seconds until RTA-A starts, if not running by then, update failed.