Telem-RTA-A: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
== M501 Default Settings == | == M501 Default Settings == | ||
{| border="1" cellpadding="5" | {| border="1" cellpadding="5" | ||
! Setting || default | ! Setting || default ver<1190 || colspan=2 | ver>1190 | ||
|- | |- | ||
| Default IP || 192.168.2.127 | | Default IP || 192.168.2.127 || colspan=2 | 192.168.0.111 | ||
|- | |- | ||
| Netmask || 255.255.255.0 | | Netmask || 255.255.255.0 || colspan=2 | 255.255.255.0 | ||
|- | |- | ||
| Login || root | | Login || root || root || martem | ||
|- | |- | ||
| Password || root | | Password || root || reH3epea || Xooviet0 | ||
|} | |} | ||
Revision as of 10:45, 16 November 2011
M501 Default Settings
| Setting | default ver<1190 | ver>1190 | |
|---|---|---|---|
| Default IP | 192.168.2.127 | 192.168.0.111 | |
| Netmask | 255.255.255.0 | 255.255.255.0 | |
| Login | root | root | martem |
| Password | root | reH3epea | Xooviet0 |
Software upgrades for Linux
- You can find the software here
- \\Phobos\d\3_Tehniline\Tarkvara myygiks\RTA-A
Updating
- Login with FTP
- If you're using a new M501 board, use the details above
- If it's a configured RTA-A then use the IP you have configured to the device.
- Copy all files except RtaMain to /disk/
- If it fails, try again.
- Copy RtaMain to /disk/
- If RTA-A resets during the copy process, you might need to use 192.168.2.127 as the FTP IP address
- Try again
- Allow execution permissions for these files
- /disk/gateway.sh
- /disk/RtaMain
- /disk/runfirst.sh
- Wait ~30 seconds, so everything is written to flash.
- Reset RTA-A
- Wait ~30 seconds until RTA-A starts, if not running by then, update failed.