Martem Features

General:

• Basic Security
• Basic command-line examples
• IEC101 conformance test report
• Configuring IEC104 parameters in GWS
• Debugging a specific port of Martem Telem-GWx device
• Debugging GPS data in port C1 (Com1 for GWM)
• Restoring previous config in Telem-GWx devices
• User defined default setup
• Configuration redirection
• Configuring 1-wire temperature sensor
• Configuring IEC 62056-21 (IEC 1107), example with Actaris_ACE6000
• Asdu transfer - Transfering of multiple IEC101 master channels to one IEC101 slave channel

Networking:

• VPN (OpenVPN, IPSec, L2TP)
• Multiple WAN and Split access
• Custom Web Page for TELEM-GWM
• Static Routing
• Wireshark captures and IEC104, IEC61850

Firmware Upgrade:

• Firmware Upgrade
• Latest FW is available from http://phobos.martem.ee/sw/

Configuration software GWS

• Latest GWS is available from http://phobos.martem.ee/shr/gws

GWS General | Using GWS to connect with device:

• Serial connection
• Ethernet connection, SSH Settings

GWS General | Using GWS to configure common settings:

• TCP/IP Settings
• Time Settings
• Modem Settings
• Redundant connections
• Direct IEC-101 to IEC-104 Translation
• Tansparent Connections
• SNMP
• Comtrade
• Options

GWS General | Using GWS to configure data concentrator:

• Ports Tab
• Devices Tab
• Objects Tab
• Formulas Tab
• Errors Tab
• Status Tab
• GWS templates

Specific to GWM:

• SMS Protocol Configuration

Specific to GW6/GW6e:

• Configuring IEC-61850 Client via GWS
• Kuidas konfigureerida IEC61850 serverit GW6 jaoks?
• MMS modules

Manuals:

• Mounting and Commissioning Instructions
• TELEM-GW6 Manual