Martem Features

Guides and Howtos for Martem Features

General:

• Basic Security
• Configuring IEC 62056-21 (IEC 1107), example with Actaris_ACE6000
• IEC101 conformance test report
• Debugging a specific port of Martem Telem-GWx device
• Direct IEC-101 to IEC-104 Translation
• Asdu transfer - Transfering of multiple IEC101 master channels to one IEC101 slave channel
• Tansparent Connections
• Debugging GPS data in port C1 (Com1 for GWM)
• Restoring previous config in Telem-GWx devices
• COT
• Configuration of connected Telem RTU I/O modules remotely via data concentrator

Networking:

• VPN(Virtual Private Networking)
• Multiple WAN and Split access
• Custom Web Page for TELEM-GWM

Firmware Upgrade:

• Firmware Upgrade
• Latest FW is available from http://phobos.martem.ee/sw/

GWS GENEREAL on manuali sisukord, panin kirja, siis on nimekiri juba olemas, korduvaid asju ei ole ilmselt mõtet teha

• Latest GWS is available from http://phobos.martem.ee/shr/gws

GWS General | Using GWS to connect with device:

• Serial connection
• Ethernet connection

GWS General | Using GWS to configure common settings:

• SSH Setings
• TCP/IP Settings
• Time Settings
• Modem Settings
• Redundant connections
• Direct IEC-101 to IEC-104 Translation
• Transparent connections
• Open VPN
• IPsec
• L2TP
• Static Routing
• SNMP
• Comtrade
• Options

GWS General | Using GWS to configure data concentrator:

• Ports Tab
• Devices Tab
• Objects Tab
• Formulas Tab
• Errors Tab
• Status Tab
• GWS templates

Specific to GWM:

• SMS Protocol Configuration

Specific to GW6/GW6e:

• Configuring IEC-61850 Client via GWS
• Kuidas konfigureerida IEC61850 serverit GW6 jaoks?